odd SDcard behaviour in freebsd-9.0-R

[Michael Sierchio]

Forgive the naive question, but on one of my Nikons, it is possible to
present the device itself, or the SD card as a USD drive.  Which are
you doing?  No doubt there is no driver for the D50 in the kernel, but
the generic umass driver should handle the device.

On Mon, Feb 27, 2012 at 9:47 AM, John <freebsd at growveg.net> wrote:
> Hi list,
>
> I recently upgraded from 8.2-R to 9.0-R via freebsd-update and noticed
> different behaviour when I plug in my Nikon D50 via the usb port. I'm
> using the generic kernel while I try to sort this. It is the same in all
> but identity.
>
> 8.2 behaviour used to create a device /dev/da(x)s1 depending on what
> else was also connected to the USB subsystem. Typically the system would
> see the card whilst it was still in the camera as /dev/da5s1 and I could
> then mount it with mount_msdosfs.
>
> 9.0 behaviour just shows the following in /var/log/messages:
>
> Feb 26 09:18:02 potato kernel: ugen4.6: <NIKON> at usbus4
> Feb 26 09:18:02 potato kernel: umass2: <NIKON NIKON DSC D50, class 0/0,
> rev 2.00/1.00, addr 6> on usbus4
> Feb 26 09:18:02 potato kernel: umass2:  SCSI over Bulk-Only; quirks = 0x4100
> Feb 26 09:18:02 potato kernel: umass2:5:2:-1: Attached to scbus5
>
> and nothing corresponding to the device in /dev
>
> What am I doing wrong?
>
> thanks,
> --
> freebsd at growveg dot net
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"