LaCie P'9230 Is Not Recognized

[Doug Sampson]

I went out and got a LaCie P'9230 drive, an external USB 3.0/2.0 2TB drive (http://www.lacie.com/products/product.htm?id=10559). FreeBSD 9.0-STABLE #5 running on an Intel D845GEBV2L motherboard does not recognize it.

Apr 23 15:57:11 test kernel: usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored)
Apr 23 15:57:11 test kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_STALLED
Apr 23 15:57:12 test kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored)
Apr 23 15:57:12 test kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_STALLED
Apr 23 15:57:13 test kernel: usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored)
Apr 23 15:57:13 test kernel: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_STALLED
Apr 23 15:57:13 test kernel: ugen3.2: <Unknown> at usbus3 (disconnected)
Apr 23 15:57:13 test kernel: uhub_reattach_port: could not allocate new device
root at test:/usr/home/install#

'camcontrol devlist -v' does not indicate any daX devices.

I've used a variety of smaller external LaCie USB 2.0 drives with this motherboard successfully in the past.

A link at the LaCie web site (http://www.lacie.com/more/index.htm?id=10112) indicates that a driver needs to be installed on a Mac in order to realize true USB 3.0 speeds. Does this mean that for me to use this drive, I need a special driver?

I've consulted the hardware compatibility list but it appears to not have been updated to reflect newer hardware.

Any advice would be appreciated.

~Doug