problem with Xorg
Da Rock
freebsd-questions at herveybayaustralia.com.au
Mon Apr 9 11:57:15 UTC 2012
On 04/09/12 21:38, Bernt Hansson wrote:
> 2012-04-09 13:03, Da Rock skrev:
>> On 04/09/12 20:38, Bernt Hansson wrote:
>>> Hello list.
>>>
>>> When I try to start X I'm getting this error
>>
>> Yep. This one will be fun... :)
>>>
>>> X.Org X Server 1.7.7
>>> Release Date: 2010-05-04
>>> X Protocol Version 11, Revision 0
>>> Build Operating System: FreeBSD 8.2-RELEASE i386
>>> Current Operating System: FreeBSD kw.fqdn 8.2-RELEASE FreeBSD
>>> 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
>>> root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>>> Build Date: 09 April 2012 02:21:53AM
>>>
>>> Current version of pixman: 0.24.2
>>> Before reporting problems, check http://wiki.x.org
>>> to make sure that you have the latest version.
>>> Markers: (--) probed, (**) from config file, (==) default setting,
>>> (++) from command line, (!!) notice, (II) informational,
>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 9 12:30:37 2012
>>> (==) Using default built-in configuration (30 lines)
>>> (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data
>>> object.
>>> (EE) Failed to load module "fbdevhw" (invalid module, 0)
>>> Setting master
>>> The XKEYBOARD keymap compiler (xkbcomp) reports:
>>>> Warning: Type "ONE_LEVEL" has 1 levels, but<RALT> has 2
>>> symbols
>>>> Ignoring extra symbols
>>> Errors from xkbcomp are not fatal to the X server
>>> xinit: connection to X server lost
>>>
>>> waiting for X server to shut down Dropping master
>>
>> First some questions:
>>
>> 1. Does the machine lock up when you run X?
>
> No It doesn't but no picture.
>
>> 2. Do you know what video card you're using?
>
> Intel 845
>
>> 3. What is the output of pciconf -lv, dmesg?
>
> pciconf -lv
> hostb0 at pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x25608086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'DRAM Controller / Host-Hub I/F Bridge
> (82845G/GL/GV/GE/PE)'
> class = bridge
> subclass = HOST-PCI
> vgapci0 at pci0:0:2:0: class=0x030000 card=0x00b90e11 chip=0x25628086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82845G/GL/GV/GE/PE Integrated Graphics Device'
> class = display
> subclass = VGA
> uhci0 at pci0:0:29:0: class=0x0c0300 card=0x00b90e11 chip=0x24c28086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
> Controller *1'
> class = serial bus
> subclass = USB
> uhci1 at pci0:0:29:1: class=0x0c0300 card=0x00b90e11 chip=0x24c48086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
> Controller *2'
> class = serial bus
> subclass = USB
> ehci0 at pci0:0:29:7: class=0x0c0320 card=0x00b90e11 chip=0x24cd8086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI
> Controller'
> class = serial bus
> subclass = USB
> pcib1 at pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
> rev=0x81 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub
> Interface to PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge'
> class = bridge
> subclass = PCI-ISA
> atapci0 at pci0:0:31:1: class=0x01018a card=0x00b90e11 chip=0x24cb8086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL (ICH4/ICH4-L) UltraATA/100 EIDE Controller'
> class = mass storage
> subclass = ATA
> pcm0 at pci0:0:31:5: class=0x040100 card=0x00ad0e11 chip=0x24c58086
> rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Realtek AC97 Audio (82801DBM SoundMAXController
> (ICH4-M B0 step))'
> class = multimedia
> subclass = audio
> fxp0 at pci0:5:8:0: class=0x020000 card=0x00120e11 chip=0x103b8086
> rev=0x81 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL (ICH4/ICH4-L) PRO/100 VM Network
> Connection'
> class = network
> subclass = ethernet
>
>> 4. What does Xorg -configure produce?
>
> No idea, haven't tried it. Using HAL.
Given your previous answers, I'd say you _have_ to run it. Then the last
option I offered _will_ work. You need to force it to use vesa and that
is the only way.
As a last chance perhaps run X -conf /root/xorg.conf.new -retro and see
if it does happen to work; this shows up the old test pattern so that
you can see that X is actually running instead of a black screen.
>
>> Finally, can you change the driver setting in the xorg.conf.new to vesa
>> and run X -conf /root/xorg.conf.new and see if it works then?
>
> Well, starting X from remote it seems to catch on.
>
> Hmmm....Only as root. Well I'll try to rebuild it without SUID.
>
> This is from remote AND root
>
> X.Org X Server 1.7.7
> Release Date: 2010-05-04
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 8.2-RELEASE i386
> Current Operating System: FreeBSD kw.fqdn 8.2-RELEASE FreeBSD
> 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
> root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
> Build Date: 09 April 2012 02:21:53AM
>
> Current version of pixman: 0.24.2
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 9 13:27:32 2012
> (==) Using default built-in configuration (30 lines)
> (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data
> object.
> (EE) Failed to load module "fbdevhw" (invalid module, 0)
> Setting master
>
> ^Cxinit: connection to X server lost
>
> waiting for X server to shut down xterm: fatal IO error 35 (Resource
> temporarily unavailable) or KillClient on X server ":0"
> xterm: fatal IO error 35 (Resource temporarily unavailable) or
> KillClient on X server ":0"
> XIO: fatal IO error 22 (Unknown error: 0) on X server ":0"
> after 576 requests (576 known processed) with 0 events remaining.
> xterm: fatal IO error 35 (Resource temporarily unavailable) or
> KillClient on X server ":0"
> Dropping master
>
> xinit: unexpected signal 2
>
>
>
>> Good luck!
>
> I'll need it thank you.
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
More information about the freebsd-questions
mailing list