FreeBSD 9-BETA2 on a Dell Latitude D630

Thu Sep 22 00:00:30 UTC 2011

Good Day;

I wish to post a successful installation of FreeBSD 9.0 on a Dell 
Latitude D630 laptop.  Base installation was from binaries on the -amd64 
dvd.iso.  Xorg and gnome from ports fetched via portsnap on 09/18/11.  
csup'd kernel and userland source yesterday.  This is a fresh built 
custom kernel without debugging, SCSI or RAID modules.  I do not
know what this means 'GEOM_PART: Partition 'ada0p3' not suitable for 
kernel dumps (wrong type?)'.  I am still investigating why Perl 5.12.4 
dumped core at the end but otherwise the machine seems to be operating well.

#> dmesg | more

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-BETA2 #0: Wed Sep 21 17:08:56 CDT 2011
     michael@*****.*****.net:/usr/obj/usr/src/sys/KERNEL_092111 amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (1994.48-MHz 
K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory  = 1073741824 (1024 MB)
avail memory = 1003618304 (957 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL   M08 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL M08 > on motherboard
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, 3f55b800 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 
0xfea00000-0xfeafffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci1: <VGA-compatible display> mem 0xfeb00000-0xfebfffff at device 
2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 
20 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 
21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 
0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 
0xfe9fc000-0xfe9fffff irq 21 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib2
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe8ff000-0xfe8fffff irq 17 
at device 0.0 on pci12
pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 
0x00a002> mem 0xfe7f0000-0xfe7fffff irq 17 at device 0.0 on pci9
bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:21:70:91:6a:a5
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 
20 at d--More--(byte 3800)
evice 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 
21 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 
22 at device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 
0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib4
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 
0xfe6ff000-0xfe6fffff,0xfe6fe800-0xfe6fefff irq 19 at device 1.4 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 36:4f:c0:00:38:ad:b1:c1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x125c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 36:4f:c0:ad:b1:c1
fwe0: Ethernet address: 36:4f:c0:ad:b1:c1
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 36:4f:c0:00:38:ad:b1:c1 @ 0xfffe00000000, S400, 
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, 
CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 
on pci0
ata0: <ATA channel 0> on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port 
0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff 
mem 0xfe9fb800-0xfe9fbfff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 2 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on 
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Sigmatel STAC9205X
hdac0: HDA Codec #1: Conexant (Unknown)
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
pcm0: <HDA Sigmatel STAC9205X PCM #0 Analog> at cad 0 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ugen4.2: <Logitech> at usbus4
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <ST980813ASG 3.ADD> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present 
- tray closed
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on 
usbus4
ums0: 3 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ugen5.2: <vendor 0x0b97> at usbus5
uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> 
on usbus5
GEOM_PART: Partition 'ada0p3' not suitable for kernel dumps (wrong type?)
ugen4.3: <Generic> at usbus4
ukbd0: <Generic USB+PS2 Keyboard, class 0/0, rev 1.10/2.02, addr 3> on 
usbus4
kbd2 at ukbd0
uhid0: <Generic USB+PS2 Keyboard, class 0/0, rev 1.10/2.02, addr 3> on 
usbus4
uhub7: 4 ports with 3 removable, self powered
ugen5.3: <O2> at usbus5
drm0: <Intel i965GM> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
pid 2308 (perl5.12.4), uid 0: exited on signal 6 (core dumped)
pid 2310 (perl5.12.4), uid 0: exited on signal 6 (core dumped)