ppp with mode -auto

[Matthias Apitz]

Hello,

I'm using ppp(1) with mode -auto in a FreeBSD 8.x (an older 8-CURRENT);

I'm reading in the man page that the link is not coming up until
packages for the tun interface are arriving...
But my ppp starts chatting and LCP... just when it is started. My
ppp.conf file is attached; any ideas? Thanks in advance

	matthias
-- 
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <guru at unixarea.de> - w http://www.unixarea.de/
-------------- next part --------------
# 
# 
default:
 set log Phase Chat LCP IPCP CCP tun command

umts:

 set device /dev/cuaU0.0     # device name in CURRENT
 set speed 230400

 #
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
        \"\" AT OK-AT-OK ATZ OK \
        AT+CFUN=1 OK \
        AT+COPS=0 OK \
        AT+CGDCONT=1,\\\"IP\\\",\\\"pinternet.interkom.de\\\" OK \
        \\dATDT\\T TIMEOUT 40 CONNECT"

 set logout "ABORT BUSY ABORT ERROR TIMEOUT 30 \"\" +++ATH O ATH OK"

 set phone *99*1\#
 set authname "fonic"
 set authkey "fonic"
 set timeout 300
 set ifaddr 0.0.0.0/0 10.64.64.64/0 255.255.255.0 0.0.0.0
 add default HISADDR
 enable dns
 disable ipv6cp