FreeBSD 8.2 and Lenovo X300 WWAN Modem

[crsnet.pl]

 Hello.
 Have here anyone run this modem/GPS under FreeBSD 8.2 ? Modem is 
 recognized, but when i try to run ppp -ddial iplus i get this error :

 /var/log/messages
 May 18 11:20:59 x60s ppp[1656]: tun0: Warning: Chat script failed

 /var/log/ppp
 May 18 11:20:53 x60s ppp[1656]: tun0: Phase: deflink: opening -> dial
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT^M
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT^M^M
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: OK^M
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT+CFUN=1^M
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT+CFUN=1^M^M
 May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: ERROR^M


 For GPS i try to use
 gpsdrive-2.09_11    A GPS navigation system
 viking-1.0.2        Program to manage GPS data (tracks, waypoints, etc)
 But any of them can use X300 GPS;/

 #uname -a
 FreeBSD x60s 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 
 UTC 2011     root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  
 i386

 #dmesg
 ugen6.3: <vendor 0x17ef> at usbus6
 ugen4.2: <Sierra Wireless, Incorporated> at usbus4
 u3g0: <Data Interface> on usbus4
 u3g0: Found 3 ports.

 #sudo usbconfig
 ugen4.2: <Sierra Wireless MC5725 Modem Sierra Wireless, Incorporated> 
 at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
 ugen6.4: <Wimedia device ManfID> at usbus6, cfg=0 md=HOST spd=HIGH 
 (480Mbps) pwr=ON

 #ls -la /dev/cuaU*
 crw-rw----  1 uucp  dialer    0, 123 18 maj 09:39 /dev/cuaU0.0
 crw-rw----  1 uucp  dialer    0, 124 18 maj 09:39 /dev/cuaU0.0.init
 crw-rw----  1 uucp  dialer    0, 125 18 maj 09:39 /dev/cuaU0.0.lock
 crw-rw----  1 uucp  dialer    0, 129 18 maj 09:39 /dev/cuaU0.1
 crw-rw----  1 uucp  dialer    0, 130 18 maj 09:39 /dev/cuaU0.1.init
 crw-rw----  1 uucp  dialer    0, 131 18 maj 09:39 /dev/cuaU0.1.lock
 crw-rw----  1 uucp  dialer    0, 135 18 maj 09:39 /dev/cuaU0.2
 crw-rw----  1 uucp  dialer    0, 136 18 maj 09:39 /dev/cuaU0.2.init
 crw-rw----  1 uucp  dialer    0, 137 18 maj 09:39 /dev/cuaU0.2.lock

 #cat /etc/ppp/ppp.conf
 iplus:
  set log Phase Chat LCP IPCP CCP tun command
  ident user-ppp VERSION (built COMPILATIONDATE)

  set device /dev/cuaU0.0
  set speed 460800
  #set speed 115200
  set dial "ABORT BUSY TIMEOUT 2 \
         \"\" \
         AT OK-AT-OK \
         AT+CFUN=1 OK-AT-OK \
         AT+CMEE=2 OK-AT-OK \
         AT+CSQ OK \
         AT+CGDCONT=1,\\\"IP\\\",\\\"internet\\\" OK \
         AT+CGACT? OK-AT-OK \
         AT+CGATT? OK \
         AT+CGCLASS? OK \
         AT+COPS? OK \
         ATD*99***1# CONNECT"

  set timeout 180
  enable dns
  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
  add default HISADDR

 Regards, Adrian.