ZFS on 8.1 - various problems after a disk failure.
howie at thingy.com
Mon Jun 13 16:22:47 UTC 2011
I have a FreeBSD 8.2 server at home with 4 2TB drives in it running ZFS
with a raidz pool. Some time ago, I had a disk fail. Initially it wasn't
totally obvious the disk had failed so I ran a 'zpool scrub' on the
pool, which threw up a lot of errors, and also produced a lot of sense
errors, making it obvious I had a dead disk.
I replaced the disk, then ran "zpool replace zjumbo ad4 ad4" to replace
the bad disk in-place, and start a resilver.
Now I have a few problems:
1) The old ad4 is still listed, even after several scrub/resilvers.
Shouldn't it go away?
2) Although I lost a whole directory with ~1TB of music, the space
allocated to that directory is still around according df.
3) I have another bunch of files that appear in directory listings, but
if I get "Illegal byte sequence" errors when trying to read them (with
anything - du, file, wc).
I have backups of most of the stuff on the pool (although it'd be nice
to recover the more recent data), but how do I get out of this situation
without nuking the site from orbit? (my current plan) Firstly, to get a
reliable representation of what's actually on the filesystem, and for
bonus points, getting back some of the data that should be intact (only
one disk in the set was actually bad, right?).
Here's my current zpool status. Thanks in advance for any pointers!
# zpool status
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
scrub: resilver completed after 10h57m with 15190 errors on Thu May 19
NAME STATE READ WRITE CKSUM
zjumbo DEGRADED 0 0 199K
raidz1 DEGRADED 0 0 792K
replacing DEGRADED 0 0 0
ad4/old UNAVAIL 0 16.1M 0 cannot open
ad4 ONLINE 0 0 0 1.15T resilvered
ad6 ONLINE 0 0 0 677M resilvered
ad8 ONLINE 0 0 0 660M resilvered
ad10 ONLINE 0 0 0 535M resilvered
errors: 15190 data errors, use '-v' for a list
More information about the freebsd-questions