Problem with Atheros under 8.1 on a HP DL180G6

EXT-Glatting, Dennis P Dennis.P.Glatting at boeing.com
Fri Nov 19 01:28:10 UTC 2010 

I am having a problem with MikroTik/Atheros cards on a HP DL180G6. I suspect the problem is hardware/BIOS-interrupt related but I'm pretty confused as to what. Suggestions and pointers how to solve this problem are appreciated.

I have the cards running under Debian 5.0.6 (Gigabyte GA-870A-UD3 RT) with compat-wireless (compat-wireless-2.6.36-rc5-2-s.tar.bz2), FreeBSD 8.1 on a HP ML350G5, and FreeBSD 8.1 on an old Lenovo Z60t . They work both as AP and supplicant.

Hostapd, when configured and run, is what comes with FreeBSD on those systems and 0.7.3 on Debian.

The cards are a MikroTik RouterBOARD R52 and R52n on a quad miniPCI to PCI adapter.

http://www.routerboard.com/pricelist/download_file.php?file_id=96
http://www.routerboard.com/pricelist/download_file.php?file_id=170
http://www.routerboard.com/pricelist.php?showProduct=75

I don't have the part number for the riser used in the DL180G6 to old the adapter.

On the DL180G6 under Debian in AP mode, there is no beacon; however, if I pass irqpoll on boot /some/ interrupts are delivered but performance and reliability are sketchy to say the least.

Below is various outputs from the system.


> cat /var/run/dmesg.boot
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #0: Wed Nov 17 20:32:44 PST 2010
    root at Homer:/usr/src/sys/amd64/compile/HOMER amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5504  @ 2.00GHz (2000.08-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 4084613120 (3895 MB)
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
 cpu4 (AP): APIC ID: 16
 cpu5 (AP): APIC ID: 18
 cpu6 (AP): APIC ID: 20
 cpu7 (AP): APIC ID: 22
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci12: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 2.0.1> port 0xe880-0xe89f mem 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbeb8000-0xfbebbfff irq 28 at device 0.0 on pci12
igb0: Using MSIX interrupts with 9 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:25:b3:ae:19:6e
igb1: <Intel(R) PRO/1000 Network Connection version - 2.0.1> port 0xec00-0xec1f mem 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 40 at device 0.1 on pci12
igb1: Using MSIX interrupts with 9 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:25:b3:ae:19:6f
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci7
pci8: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci8
pci10: <PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xd880-0xd89f mem 0xfbdc0000-0xfbddffff,0xfbc80000-0xfbcfffff irq 38 at device 0.0 on pci10
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:26:55:d8:45:09
em1: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xdc00-0xdc1f mem 0xfbde0000-0xfbdfffff,0xfbd00000-0xfbd7ffff irq 39 at device 0.1 on pci10
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:26:55:d8:45:08
pcib6: <PCI-PCI bridge> at device 4.0 on pci8
pci9: <PCI bus> on pcib6
em2: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xc880-0xc89f mem 0xfbbc0000-0xfbbdffff,0xfba80000-0xfbafffff irq 37 at device 0.0 on pci9
em2: Using MSI interrupt
em2: [FILTER]
em2: Ethernet address: 00:26:55:d8:45:0b
em3: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xcc00-0xcc1f mem 0xfbbe0000-0xfbbfffff,0xfbb00000-0xfbb7ffff irq 30 at device 0.1 on pci9
em3: Using MSI interrupt
em3: [FILTER]
em3: Ethernet address: 00:26:55:d8:45:0a
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xa480-0xa49f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2400
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfa7fa000-0xfa7fa3ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 on pci3
pci5: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 1.0 on pci5
pci6: <PCI bus> on pcib9
ath0: <Atheros 9280> mem 0xfb9e0000-0xfb9effff irq 17 at device 8.0 on pci6
ath0: [ITHREAD]
ath0: AR9280 mac 128.2 RF5133 phy 13.0
ath1: <Atheros 5212> mem 0xfb9f0000-0xfb9fffff irq 19 at device 10.0 on pci6
ath1: [ITHREAD]
ath1: AR5413 mac 10.5 RF5413 phy 6.1
pcib10: <PCI-PCI bridge> mem 0xfb8ffc00-0xfb8ffc7f irq 16 at device 0.1 on pci3
pci4: <PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfb7fc000-0xfb7fffff,0xfa800000-0xfaffffff irq 16 at device 0.0 on pci2
uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0xa800-0xa81f irq 23 at device 29.0 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2400
usbus2: <Intel 82801JI (ICH10) USB controller USB-A> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0xa880-0xa89f irq 19 at device 29.1 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2400
usbus3: <Intel 82801JI (ICH10) USB controller USB-B> on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0xac00-0xac1f irq 18 at device 29.2 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2400
usbus4: <Intel 82801JI (ICH10) USB controller USB-C> on uhci3
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfa7fc000-0xfa7fc3ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff90-0xff9f,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH10 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f,0xb080-0xb08f irq 19 at device 31.5 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
qpi0: <QPI system bus> on motherboard
pcib13: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib13
pcib14: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib14
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ad0: 152627MB <GB0160EAFJE HPG0> at ata0-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus1
Root mount waiting for: usbus5
uhub5: 6 ports with 6 removable, self powered
ugen0.2: <ServerEngines> at usbus0
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus0
kbd2 at ukbd0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus0
Trying to mount root from ufs:/dev/ad0s1a
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen3.2: <CHESEN> at usbus3
ukbd1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus3
kbd3 at ukbd1
ums1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus3
ums1: 5 buttons and [XYZ] coordinates ID=1
wlan0: Ethernet address: 00:0c:42:61:9b:10
wlan1: Ethernet address: 00:0c:42:31:1c:8d
>


Interesting additional dmesg output when I run the supplicant:

ath0: unable to reset hardware; hal status 14
ath0: unable to reset hardware; hal status 3
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath0: unable to reset hardware; hal status 3
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout
ath1: device timeout


> cat /etc/wpa_supplicant.conf

network={
        ssid="SECRACK-GATELINK"
        proto=RSN
        key_mgmt=WPA-EAP
        eap=TLS
        identity="twlu"
        ca_cert="/etc/wless/CAd.cert.pem"
        client_cert="/etc/wless/CAd.twlu.cert.pem"
        private_key="/etc/wless/CAd.twlu.priv.pem"
        private_key_passwd="frogger"
}


Homer# cat /etc/rc.conf

<< snip >>
#
wlans_ath0="wlan0"
ifconfig_wlan0="WPA DHCP"

#
wlans_ath1="wlan1"
ifconfig_wlan1="WPA DHCP"



Homer# wpa_supplicant -d -iwlan0 -c /etc/wpa_supplicant.conf
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Priority group 0
   id=0 ssid='SECRACK-GATELINK'
Initializing interface (2) 'wlan0'
Own MAC address: 00:0c:42:61:9b:10
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
ioctl[SIOCS80211, op 103, len 128]: Device not configured
Failed to initiate AP scan.
Setting scan request: 10 sec 0 usec
EAPOL: disable timer tick
Starting AP scan (broadcast SSID)
ioctl[SIOCS80211, op 103, len 128]: Device not configured
Failed to initiate AP scan.
Setting scan request: 10 sec 0 usec
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_bsd_set_wpa: enabled=0
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
ioctl[SIOCS80211, op 26, arg 0x0]: Operation not supported
Failed to disable WPA in the driver.
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
ELOOP: remaining socket: sock=4 eloop_data=0x800e0b1c0 user_data=0x800e070f0 handler=0x421840
Homer#






Homer# wpa_supplicant -d -iwlan1 -c /etc/wpa_supplicant.conf
Initializing interface 'wlan1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Priority group 0
   id=0 ssid='SECRACK-GATELINK'
Initializing interface (2) 'wlan1'
Own MAC address: 00:0c:42:31:1c:8d
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan1
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
EAPOL: disable timer tick
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan1
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_bsd_set_wpa: enabled=0
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
ioctl[SIOCS80211, op 26, arg 0x0]: Operation not supported
Failed to disable WPA in the driver.
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=0
ELOOP: remaining socket: sock=4 eloop_data=0x800e0b1c0 user_data=0x800e070f0 handler=0x421840
Homer#

More information about the freebsd-questions mailing list