UPS question

[Ryan Coleman]

On Aug 12, 2010, at 2:49 PM, David Brodbeck wrote:

> 
> On Aug 12, 2010, at 12:40 PM, Ryan Coleman wrote:
>> Yes. The downside comes from when the BIOS is told to turn on the server at, say, 10pm and the power is still out... it starts the process and runs out of battery mid-way through the boot before it gets the chance to load the UPS controller.
> 
> You may want to think about using two UPS units -- a large one for your server, and a smaller one for your network stack.  This way you can use UPS monitoring software (like NUT or PowerChute) to have the server command its UPS to switch off when it's fully shut down.  Then when power comes back the server UPS will switch back on and the server will boot back up, assuming you've set the BIOS to boot up on power recovery.  Some UPS units have the ability to set a power recovery delay to ensure the battery has some charge before the server starts up, too.

Great idea, I'll definitely keep that in mind.

--
Ryan