LSI SAS3041E write cache
Andrey Mundirov
useryear at mail.ru
Tue Apr 13 13:36:27 UTC 2010
I have LSI SAS3041E RAID controller and FreeBSD 7.3. When I try to enable write cache on RAID array, mptutil
fails with following message:
# mptutil volume cache 0 enable
mptutil: Reading config page failed: Invalid configuration page
My configuration:
# mptutil version
mptutil version 1.0.3
# mptutil show adapter
mpt0 Adapter:
Board Name: SAS3041E
Board Assembly: L3-01101-04E
Chip Name: C1064E
Chip Revision: UNUSED
RAID Levels: RAID0, RAID1, RAID1E
RAID0 Stripes: 64K
RAID1E Stripes: 64K
RAID0 Drives/Vol: 2-10
RAID1 Drives/Vol: 2
RAID1E Drives/Vol: 3-10
# mptutil show config
mpt0 Configuration: 1 volumes, 2 drives
volume 0 (148G) RAID-1 OPTIMAL spans:
drive 1 (149G) ONLINE <ST3160827AS 3.42> SATA
drive 0 (149G) ONLINE <ST3160827AS 3.42> SATA
spare pools: 0
# mptutil show volumes
mpt0 Volumes:
Id Size Level Stripe State Write-Cache Name
0 ( 148G) RAID-1 OPTIMAL Disabled
# mptutil volume status 0
Volume 0 status:
state: OPTIMAL
flags: DISABLED
More information about the freebsd-questions
mailing list