baerks at t-online.de
Sun Nov 15 18:11:29 UTC 2009
I am writing to this list because I haven't found anything that helps
me in the 'web' nor in usenet.
First I have to apologize for my bad english and mey bad knowing of
what I'm doing with FreeBSD, I am not a 'hacker' but just a user.
Well my problem is mounting my digital camera. If I remember correctly
I did it with
mount_msdosfs /dev/da0s1 /lumix
I think that was under FreeBSD 6.n
But now, upgraded to 7.2, there ist no /dev/da0.
Attached to an iBook with Mac OS X 10.4 the cards were well mounted as
If I attach the camera to the FreeBSD PC the console gives
[attaching the camera]
| umass0: <Panasonic DMC-FX8, class 0/0, rev 1.10/0.10, addr 4> on
|(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
|(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
|(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
|(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
|(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
|(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
|da0 at umass-sim0 bus 0 target 0 lun 0
|da0: <MATSHITA DMC-FX8 0100> Removable Direct Access SCSI-2 device
|da0: 1.000MB/s transfers
|da0: 14MB (29121 512 byte sectors: 64H 32S/T 14C)
But there is no /dev/da0
# ls /dev/da*
ls: No match.
If I detach it the console writes
[detaching the camera]
| umass0: at uhub0 port 8 (addr 4) disconnected
|(da0:umass-sim0:0:0:0): lost device
|(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x39, scsi
|(da0:umass-sim0:0:0:0): removing device entry
I haven't any clue if it's FreeBSD's fault, the camera's or mine.
Is there somone who can give me some hint?
More information about the freebsd-questions