/dev/sa0 no longer recognized after 7.2 update

[bsd]

Hello,

I am configuring a backup device with bacula;
This device used to be mapped on /dev/sa0

After my system has been updated from 7.0 to 7.2 the device is no  
longer recognized.

I am using freebsd-update and a pre-configured kernel.


Any idea ??


Here is the output of my dmesg:


Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights  
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May  1 07:18:07 UTC 2009
     root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz (2673.31-MHz K8- 
class CPU)
   Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
    
Features 
= 
0xbfebfbff 
< 
FPU 
,VME 
,DE 
,PSE 
,TSC 
,MSR 
,PAE 
,MCE 
,CX8 
,APIC 
,SEP 
,MTRR 
,PGE 
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
    
Features2 
= 
0xce3bd 
<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 4
usable memory = 4275990528 (4077 MB)
avail memory  = 4079812608 (3890 MB)
ACPI APIC Table: <INTEL  S5000VSA>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000VSA> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff  
on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
aac0: <Adaptec RAID 3405> mem 0xb8a00000-0xb8bfffff irq 18 at device  
14.0 on pci4
aac0: Enabling 64-bit address support
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: Adaptec 3405, aac driver 2.0.0-1
aacp0: <SCSI Passthrough Bus> on aac0
aacp1: <SCSI Passthrough Bus> on aac0
aacp2: <SCSI Passthrough Bus> on aac0
pcib5: <PCI-PCI bridge> at device 0.2 on pci3
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci7: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2020-0x203f  
mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0  
on pci7
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:53:37:28
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2000-0x201f  
mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1  
on pci7
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:53:37:29
pcib8: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci8: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 3.0 on pci0
pci9: <PCI bus> on pcib9
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port  
0x3080-0x309f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port  
0x3060-0x307f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port  
0x3040-0x305f irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port  
0x3020-0x303f irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8e00400-0xb8e007ff  
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0x1400-0x14ff mem  
0xb0000000-0xb7ffffff,0xb8d00000-0xb8d0ffff irq 17 at device 12.0 on  
pci11
sym0: <1010-66> port 0x1000-0x10ff mem 0xb8d12000-0xb8d123ff, 
0xb8d10000-0xb8d11fff irq 16 at device 13.0 on pci11
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af mem  
0xb8e00000-0xb8e003ff irq 20 at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10  
on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc97ff, 
0xc9800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
umass0: <TEAC TEAC FD-05PUW, class 0/0, rev 2.00/0.00, addr 2> on uhub2
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorp CDDVDW SH-S223F/SB00> at ata0-master SATA150
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 285686MB (585084928 sectors)
(probe780:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe780:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe780:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe780:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe780:umass-sim0:0:0:0): Power on, reset, or bus device reset  
occurred
(probe780:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(probe780:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe780:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe780:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe780:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe780:umass-sim0:0:0:0): Medium not present
(probe780:umass-sim0:0:0:0): Unretryable error
GEOM_LABEL: Label for provider aacd0s1a is ufsid/49144f76156ad96a.
GEOM_LABEL: Label for provider aacd0s1d is ufsid/49144f7fa22f4f43.
GEOM_LABEL: Label for provider aacd0s1e is ufsid/49144f7f3b01ea1a.
GEOM_LABEL: Label for provider aacd0s1f is ufsid/49144f80de269f7c.
GEOM_LABEL: Label for provider aacd0s1g is ufsid/49144f763236b77b.
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <TEAC FD-05PUW 3000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/aacd0s1a
GEOM_LABEL: Label ufsid/49144f76156ad96a removed.
GEOM_LABEL: Label for provider aacd0s1a is ufsid/49144f76156ad96a.
GEOM_LABEL: Label ufsid/49144f763236b77b removed.
GEOM_LABEL: Label for provider aacd0s1g is ufsid/49144f763236b77b.
GEOM_LABEL: Label ufsid/49144f7fa22f4f43 removed.
GEOM_LABEL: Label for provider aacd0s1d is ufsid/49144f7fa22f4f43.
GEOM_LABEL: Label ufsid/49144f7f3b01ea1a removed.
GEOM_LABEL: Label for provider aacd0s1e is ufsid/49144f7f3b01ea1a.
GEOM_LABEL: Label ufsid/49144f80de269f7c removed.
GEOM_LABEL: Label for provider aacd0s1f is ufsid/49144f80de269f7c.
GEOM_LABEL: Label ufsid/49144f76156ad96a removed.
GEOM_LABEL: Label ufsid/49144f763236b77b removed.
GEOM_LABEL: Label ufsid/49144f7fa22f4f43 removed.
GEOM_LABEL: Label ufsid/49144f7f3b01ea1a removed.
GEOM_LABEL: Label ufsid/49144f80de269f7c removed.
em0: link state changed to UP

??


¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Gregober ---> PGP ID --> 0x1BA3C2FD
bsd @at@ todoo.biz
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

P "Please consider your environmental responsibility before printing  
this e-mail"