7.4 -> X -configure gives No devices to configure
Anton Shterenlikht
mexas at bristol.ac.uk
Fri Feb 13 01:26:33 PST 2009
On Thu, Feb 12, 2009 at 03:31:43PM -0500, Robert Noland wrote:
> On Wed, 2009-02-11 at 10:42 +0000, Anton Shterenlikht wrote:
> > Upgrade from 7.3 to 7.4 made X unsuable on FBSD 7.1-stable i386.
> > I followed the UPDATE procedures, had no errors on build,
> > but on X -configure I get
> >
> > No devices to configure. Configuration failed.
> >
> > This is a Compaq Armada 1700 laptop, old I know, but 7.3 worked
> > fine. The graphics is by Chips and Technologies, nothing fancy,
> > and the driver is xf86-video-chips-1.2.1. The full log is below.
> >
> > What's going on?
> >
> > many thanks
> > anton
> >
> > *******************************
> >
> > X.Org X Server 1.5.3
> > Release Date: 5 November 2008
> > X Protocol Version 11, Revision 0
> > Build Operating System: FreeBSD 7.1-STABLE i386
> > Current Operating System: FreeBSD mech-aslap33.men.bris.ac.uk 7.1-STABLE FreeBSD 7.1-STABLE #0: Sat Jan 31 14:31:50 GMT 2009 mexas at mech-aslap33.men.bris.ac.uk:/usr/obj/usr/src/sys/ARMADA1700 i386
> > Build Date: 09 February 2009 10:16:23AM
> >
> > Before reporting problems, check http://wiki.x.org
> > to make sure that you have the latest version.
> > Markers: (--) probed, (**) from config file, (==) default setting,
> > (++) from command line, (!!) notice, (II) informational,
> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 11 10:15:59 2009
> > (II) Loader magic: 0x81bede0
> > (II) Module ABI versions:
> > X.Org ANSI C Emulation: 0.4
> > X.Org Video Driver: 4.1
> > X.Org XInput driver : 2.1
> > X.Org Server Extension : 1.1
> > X.Org Font Renderer : 0.6
> > (II) Loader running on freebsd
> > (--) Using syscons driver with X support (version 2.0)
> > (--) using VT number 9
> >
> > (--) PCI:*(0 at 0:8:0) Chips and Technologies F65555 HiQVPro rev 168, Mem @ 0x40000000/0, BIOS @ 0x????????/65536
> > List of video drivers:
> > chips
> > (II) LoadModule: "chips"
> >
> > (II) Loading /usr/local/lib/xorg/modules/drivers//chips_drv.so
> > (II) Module chips: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.2.1
> > Module class: X.Org Video Driver
> > ABI class: X.Org Video Driver, version 4.1
> > (II) System resource ranges:
> > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > (II) Primary Device is: PCI 00 at 00:08:0
> > No devices to configure. Configuration failed.
>
> I'll need to see a pciconf -lv, but it looks like the chips driver isn't
> recognizing your chip. You could try the vesa driver. The chips driver
> has not been maintained in quite a while I would say.
#pciconf -lv
hostb0 at pci0:0:0:0: class=0x060000 card=0x04600e11 chip=0x71928086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Not Implemented)'
class = bridge
subclass = HOST-PCI
isab0 at pci0:0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
uhci0 at pci0:0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
none0 at pci0:0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
vgapci0 at pci0:0:8:0: class=0x030000 card=0xb0490e11 chip=0x00e5102c rev=0xa8 hdr=0x00
vendor = 'Asiliant (Chips And Technologies)'
device = 'F65555 HiQVPro GUI Accelerator'
class = display
subclass = VGA
cbb0 at pci0:0:17:0: class=0x060700 card=0xb0470e11 chip=0xac17104c rev=0x02 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1220 PC Card CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1 at pci0:0:17:1: class=0x060700 card=0xb0470e11 chip=0xac17104c rev=0x02 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1220 PC Card CardBus Controller'
class = bridge
subclass = PCI-CardBus
rl0 at pci0:1:0:0: class=0x020000 card=0x042810bd chip=0x813910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
class = network
subclass = ethernet
many thanks
anton
--
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 928 8233
Fax: +44 (0)117 929 4423
More information about the freebsd-questions
mailing list