Link UP/DOWN problem with re0 on FreeBSD 7.1
FreeBSD
freebsd at optiksecurite.com
Wed Feb 4 13:53:12 PST 2009
FreeBSD a écrit :
> Graeme Dargie a écrit :
>> If you do a dmesg are you also showing a watchdog time out for the nic ?
>>
>> I only ask as I am having the exact same problem with the exact same
>> card and I have yet to find a solution, if I come across something I
>> will let you know.
>>
>> Regards
>> Graeme
>
> Not a single time...sorry.
>
>>
>> -----Original Message-----
>> From: FreeBSD [mailto:freebsd at optiksecurite.com] Sent: 26 January 2009
>> 18:58
>> To: freebsd-questions at freebsd.org
>> Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
>>
>> FreeBSD a écrit :
>>> Hi everyone,
>>>
>>> Just to put you in context, I applied the following patch to make the
>>> card available:
>>>
>>> SVN rev 186389 on 2008-12-22 00:46:22Z by yongari
>>>
>>> Since we don't request reset for rlphy(4), the link state 'UP'
>>> event from mii(4) may not be delivered if valid link was already
>>> established. To address the issue, check current link state after
>>> driving MII_TICK. This should fix a regression introduced in
>>> r185753 on fast ethernet controllers.
>>>
>>> ---
>>>
>>> I don't have any issue related to that anymore. The problem is that I
>>> get link UP/DOWN a few times per hour on 3 identical machines that I
>>> dumped/restored. They are all pluged in a Cisco switch that works
>>> fine for every other PCs.
>>>
>>> Jan 26 06:09:15 term005 kernel: re0: link state changed to DOWN
>>> Jan 26 06:09:17 term005 kernel: re0: link state changed to UP
>>>
>>> I tried to switch cables, but I got the same result.
>>>
>>> There is the pciconf -lv output:
>>>
>>> re0 at pci0:3:0:0: class=0x020000 card=0x02831028 chip=0x816810ec
>>> rev=0x02 hdr=0x00
>>> vendor = 'Realtek Semiconductor'
>>> device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
>>> class = network
>>> subclass = ethernet
>>>
>>> There is the output of vmstat -i:
>>>
>>> interrupt total rate
>>> irq18: re0 ehci0++ 63766 0
>>> irq19: atapci0 277001 3
>>> cpu0: timer 156068748 1961
>>> Total 156409515 1966
>>>
>>> Could it be related to the fact that there is re0 and ehci0++ on the
>>> same IRQ?
>>>
>>> Thank you for your help,
>>>
>>> Martin
>>
>> I just tried with a brand new Dell 2708 switch and the problem is
>> still there. I just confirmed that the UP/DOWN occurs every 10 minutes
>> (+- a few seconds).
>>
>> Thanks again,
>>
>> Martin
>>
Just to follow-up on my own problem...
I tried to disable some options of the card with :
ifconfig re0 -rxcsum -txcsum -tso -lro -vlanhwtag
but nothing as changed. I just tried to download a big file (FreeBSD
7.1-REL DVD iso in fact) to see if the deconnection occurs even during a
transfer. The DVD downloaded successfully and I verified that the MD5
are OK. BUT, /var/log/messages continue to tell me that:
Feb 4 16:09:29 term003 kernel: re0: link state changed to UP
Feb 4 16:19:26 term003 kernel: re0: link state changed to DOWN
Feb 4 16:19:30 term003 kernel: re0: link state changed to UP
Feb 4 16:19:32 term003 kernel: re0: link state changed to DOWN
during the transfer (which worked OK). I don't know if that can help
someone to help me ;)
Thanks,
Martin
More information about the freebsd-questions
mailing list