HP Proliant DL360 G5

[Michael Lednev]

Julien Cigar пишет:
> Dear FreeBSD users,
>
> Our hardware begins to age and we plan to buy two new machines at HP.
> Our choice focused on the HP Proliant DL360 G5. As HP doesn't officially
> support FreeBSD, I checked with the "7.0-RELEASE Hardware Notes" and
> everything seems to be supported, except the network interface which is
> an HP NC373i. From what I can see, only NC370i and NC370T are supported.
>
> Can someone confirm that this chip is not supported (and that the rest
> is OK) ? If you have other comments about our choice they are welcome
> too ...
>   
from dmesg

bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 
0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci3
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
bce0: Ethernet address: 00:22:64:06:f8:96
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W 
(0x01090605); Flags( MFW MSI )
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 
0xfa000000-0xfbffffff irq 19 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
bce1: Ethernet address: 00:22:64:06:f8:8a
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W 
(0x01090605); Flags( MFW MSI )