Printing to a Lanier LD160c does not work
Jeremy Chadwick
koitsu at FreeBSD.org
Thu Oct 16 14:20:02 PDT 2008
On Thu, Oct 16, 2008 at 08:36:42PM +0000, ajphanks at comcast.net wrote:
> I am trying to setup a Lanier LD160c (admincolor) that has a network interface. I am new to FreeBSD and tried to follow the handbook. I am able to print to a HP 5SI (corp-admin) with no problems. There are no errors in the lpd-errs and the file is drained from the queue, but the printer does not print anything. And this is a working printer to Windows.
> lpr -P admincolor testfile.txt
>
> printcap:
> corp-admin|hp|laserjet|Hewlett Packard LaserJet 5Si:\
> :lp=\
> :sd=/var/spool/output/corp-admin:rm=corp-admin:\
> :lf=/var/log/lpd-errs:\
> :if=/usr/local/libexec/crlfilter:sh:tr=\f:mx#0:
>
> admincolor|hp|laserjet|LANIER LD160c RPCS:\
> :lp=\
> :sd=/var/spool/output/admincolor:rm=admincolor:\
> :lf=/var/log/lpd-errs:
If this printer is hooked up on the network (e.g. via Ethernet), I
believe you need to set the lp variable to the hostname or IP address of
the printer, e.g.:
admincolor|hp|laserjet|LANIER LD160c RPCS:\
:lp=192.168.1.100\
:sd=/var/spool/output/admincolor:rm=admincolor:\
:lf=/var/log/lpd-errs:
I think this also makes the assumption that the printer knows how to
speak the LPR protocol. If it listens on a custom port, you can use
portnumber at ipaddress instead. See the printcap(5) man page, I guess.
P.S. -- I've never done this, it's just something I remember from
old days. :-)
--
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |
More information about the freebsd-questions
mailing list