Network card SiS 191 not detected

[Amer Alhabsi]

Hi,

I have Benq Joybook R43 notebook. It has network interface based on SiS 191.
However, I can't configure it as it does not show up in ifconfig nor in
sysinstall/configure/networking/interfaces. Dmesg says: No Driver Attached.
I wonder if there is a way to get it working.

Here is part of the output of

pciconf -lv

none0 at pci0:0:4:0:    class=0x020000 card=0x059417ff chip=0x01911039 rev=0x02
hdr=0x00
    vendor     = 'Silicon Integrated Systems (SiS)'
    device     = 'SIS191 SIS191'
    class      = network
    subclass   = ethernet

And here is dmesg.boot

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (1999.45-MHz 686-class
CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 936968192 (893 MB)
avail memory = 903118848 (861 MB)
ACPI APIC Table: <PTLTD       APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.4> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <BenQ Joybook> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x907f mem
0xc0000000-0xcfffffff,0xd4000000-0xd401ffff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5513 WDMA2 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1080-0x108f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <SiS 5571 USB controller> mem 0xd4204000-0xd4204fff irq 20 at device
3.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xd4205000-0xd4205fff irq 21 at device
3.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd4206000-0xd4206fff irq 22
at device 3.3 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 8 ports with 8 removable, self powered
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/51.95, addr 2> on uhub2
pci0: <network, ethernet> at device 4.0 (no driver attached)
atapci1: <SiS 5513 WDMA2 controller> port
0x10c8-0x10cf,0x10bc-0x10bf,0x10c0-0x10c7,0x10b8-0x10bb,0x10a0-0x10af irq 17
at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib2: <PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci2: <PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xd4100000-0xd410ffff irq 16 at device 0.0 on
pci2
ath0: [ITHREAD]
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib3
pci0: <multimedia> at device 15.0 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff pnpid
ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: DVDR <Optiarc DVD RW AD-7560A/DX09> at ata0-master WDMA2
ad4: 152627MB <FUJITSU MHY2160BH 0000000B> at ata2-master WDMA2
GEOM_LABEL: Label for provider ad4s1 is ext2fs//boot.
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s3a

Amer,

Thanks,