Wifi Card for laptop
Albert Shih
Albert.Shih at obspm.fr
Thu Nov 20 16:43:34 PST 2008
Le 20/11/2008 à 11:35:20+0200, Giorgos Keramidas a écrit
Hi,
First thanks you for you help
In fact I make the wifi run by using wpi driver.
> If you can find a PC-CARD (or `PCMCIA') that uses one of the supported
> chipsets, then just go for it.
>
> To see if the internal network interface card or wireless adapter work,
> you can try running:
>
> % pciconf -lv
>
> Save this to a text file:
>
> % pciconf -lv > pciconf.txt
>
> Then you can use a USB flash drive to transfer the text file to a
> machine that has email connectivity and post it here. We can try to go
> through the list of devices and check hardware compatibility for you.
>
> If you do that, please include as much information as possible about the
> FreeBSD version you are using, and any other bits you think are useful
> to understand what hardware you are using (i.e. laptop model, laptop
> maker, the output of the ``uname -a'' command, and so on).
But if I can help to make more hardware working on FreeBSD I would happy to
do that so let's go:
Hardware :
Dell laptop Precision M6300
Running wihtout problem:
touchpad
X11 (using nv drivers but not the «official» because I'm
running amd64 version).
running but with some problem :
wifi card : chipset 3945
drivers : wpi (compiling in kernel)
problem : sometime the wifi go down (the AP is at < 1m) and
when I try to make that up again he don't work. If I try
the keyboard touch (Fn+F2) that's can crash (reboot) the
computer
Find drivers but not running :
sound. I got
[root@ ~]# dmesg|grep pcm
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf6ffc000-0xf6ffffff irq 21 at device 27.0 on pci0
pcm0: [ITHREAD]
pcm0: <HDA Codec: Sigmatel STAC9205>
pcm0: <HDA Driver Revision: 20080420_0052>
[root@ ~]#
but I don't have dsp device in my /dev so no sound....
No driver (and of course not working)
NetXtreme BCM5756ME Gigabit Ethernet PCIe
USB ports working.
I've not try Firewire, pccard, MIC.
I'm running
FreeBSD 7.1-PRERELEASE
make after csup (with tag=RELENG_7) and make buildworld;kernel.
I can make «any» test you want. Just ask me.
Bests regards.
****************************************************************************
Here my pciconf -lv
stb0 at pci0:0:0:0: class=0x060000 card=0x01f81028 chip=0x2a008086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:1:0: class=0x060400 card=0x01f81028 chip=0x2a018086 rev=0x0c hdr=0x01
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express PCIe Root Port'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:0:26:0: class=0x0c0300 card=0x01f81028 chip=0x28348086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci1 at pci0:0:26:1: class=0x0c0300 card=0x01f81028 chip=0x28358086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
ehci0 at pci0:0:26:7: class=0x0c0320 card=0x01f81028 chip=0x283a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcm0 at pci0:0:27:0: class=0x040300 card=0x01f81028 chip=0x284b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8'
class = multimedia
pcib2 at pci0:0:28:0: class=0x060400 card=0x01f81028 chip=0x283f8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 1'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:0:28:1: class=0x060400 card=0x01f81028 chip=0x28418086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 2'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:0:28:3: class=0x060400 card=0x01f81028 chip=0x28458086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 4'
class = bridge
subclass = PCI-PCI
pcib5 at pci0:0:28:5: class=0x060400 card=0x01f81028 chip=0x28498086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 6'
class = bridge
subclass = PCI-PCI uhci2 at pci0:0:29:0: class=0x0c0300 card=0x01f81028 chip=0x28308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci3 at pci0:0:29:1: class=0x0c0300 card=0x01f81028 chip=0x28318086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci4 at pci0:0:29:2: class=0x0c0300 card=0x01f81028 chip=0x28328086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
ehci1 at pci0:0:29:7: class=0x0c0320 card=0x01f81028 chip=0x28368086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI'
class = serial bus
subclass = USB
pcib6 at pci0:0:30:0: class=0x060401 card=0x01f81028 chip=0x24488086 rev=0xf2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x01f81028 chip=0x28118086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH8M (ICH8 Family) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:31:1: class=0x01018a card=0x01f81028 chip=0x28508086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
class = mass storage
subclass = ATA
atapci1 at pci0:0:31:2: class=0x01018f card=0x01f81028 chip=0x28288086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH8M (ICH8 Family) 3 port SATA Controller'
class = mass storage
subclass = ATA
none0 at pci0:0:31:3: class=0x0c0500 card=0x01f81028 chip=0x283e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) SMBus Controller'
class = serial bus
subclass = SMBus
vgapci0 at pci0:1:0:0: class=0x030000 card=0x019b1028 chip=0x040d10de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = display
subclass = VGA
wpi0 at pci0:12:0:0: class=0x028000 card=0x10218086 chip=0x42228086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '10418086 Intel 3945ABG Wireless LAN controller'
class = network
none1 at pci0:9:0:0: class=0x020000 card=0x01f81028 chip=0x167414e4 rev=0x00 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5756ME Gigabit Ethernet PCIe'
class = network
subclass = ethernet
fwohci0 at pci0:3:1:0: class=0x0c0010 card=0x01f81028 chip=0x08321180 rev=0x05 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
device = 'unknown IEEE 1394 (4 pin firewire) chip)'
class = serial bus
subclass = FireWire
none2 at pci0:3:1:1: class=0x080501 card=0x01f81028 chip=0x08221180 rev=0x22 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
device = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller'
class = base peripheral
none3 at pci0:3:1:2: class=0x088000 card=0x01f81028 chip=0x08431180 rev=0x12 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
device = 'unknown Ricoh MMC Host Controller'
class = base peripheral
none4 at pci0:3:1:3: class=0x088000 card=0x01f81028 chip=0x05921180 rev=0x12 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
device = '13871043 Ricoh Memory Stick Host Controller'
class = base peripheral
none5 at pci0:3:1:4: class=0x088000 card=0x01f81028 chip=0x08521180 rev=0x12 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
device = 'unknown Ricoh xD-Picture Card Host Controller'
class = base peripheral
*********************************************************************************
Here the dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #1: Wed Nov 19 03:20:47 CET 2008
root at XXXXXXXXXXX:/usr/obj/usr/src/sys/XXX
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz (2592.78-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4278091776 (4079 MB)
avail memory = 4124418048 (3933 MB)
ACPI APIC Table: <DELL M08 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL M08 > on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, dfd83c00 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf5000000-0xf5ffffff,0xe0000000-0xefffffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf6ffc000-0xf6ffffff irq 21 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib3
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf1fff000-0xf1ffffff irq 17 at device 0.0 on pci12
wpi0: Ethernet address: 00:1f:3c:c8:fa:20
wpi0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci13: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib5
pci9: <network, ethernet> at device 0.0 (no driver attached)
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib6
fwohci0: <1394 Open Host Controller Interface> mem 0xf1aff800-0xf1afffff irq 19 at device 1.0 on pci3
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 48:4f:c0:00:0c:7c:04:90
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1144000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 4a:4f:c0:7c:04:90
fwe0: Ethernet address: 4a:4f:c0:7c:04:90
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 48:4f:c0:00:0c:7c:04:90 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci3: <base peripheral> at device 1.1 (no driver attached)
pci3: <base peripheral> at device 1.2 (no driver attached)
pci3: <base peripheral> at device 1.3 (no driver attached)
pci3: <base peripheral> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff irq 18 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xcffff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub0
uhub7: 4 ports with 3 removable, self powered
ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub7
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <TSSTcorp DVD+/-RW TS-L632H/D400> at ata0-master UDMA33
ad4: 190782MB <Seagate ST9200423ASG DE14> at ata2-master SATA300
pcm0: <HDA Codec: Sigmatel STAC9205>
pcm0: <HDA Driver Revision: 20080420_0052>
GEOM_LABEL: Label for provider ad4s1 is msdosfs/DellUtility.
GEOM_LABEL: Label for provider ad4s2 is ntfs/OS.
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
cd0 at ata0 bus 0 target S0M Pl:u nA P0 CP
Uc d#0:1 L<aTuSnScThceodr!p
DVD+-RW TS-L632H D400> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s3a
WARNING: / was not properly dismounted
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
wpi0: link state changed to UP
--
Albert SHIH
SIO batiment 15
Observatoire de Paris Meudon
5 Place Jules Janssen
92195 Meudon Cedex
Téléphone : 01 45 07 76 26
Heure local/Local time:
Ven 21 nov 2008 01:23:01 CET
More information about the freebsd-questions
mailing list