New AMD Processor:RM-72

[weinter.lim]

Paul B. Mahol wrote:
> 
> On 11/14/08, weinter.lim <limguowei at gmail.com> wrote:
>>
>>
>>
>> weinter.lim wrote:
>>>
>>> Hi,
>>> I have tried installing FreeBSD 7.1-BETA2 on my Laptop with a Relatively
>>> new
>>> Mobile Processor AMD X2 Turion RM-72 2.1GHZ 1MB L2 Cache
>>> I find that the temperature during normal operation is very high 70
>>> degress IDLE
>>> When Compiling it hits 90 degress
>>> All this is happening even with power_d enabled
>>> Anyone else encountered similar issues with solution?
>>>
>>
>> hw.acpi.thermal.min_runtime: 0
>> hw.acpi.thermal.polling_rate: 10
>> hw.acpi.thermal.user_override: 0
>> hw.acpi.thermal.tz0.temperature: 69.0C (Changes to 90 degrees during
>> compiling)
>> hw.acpi.thermal.tz0.active: -1
> Does this one ever change?
> 
>> hw.acpi.thermal.tz0.passive_cooling: 1
>> hw.acpi.thermal.tz0.thermal_flags: 0
>> hw.acpi.thermal.tz0._PSV: 99.0C
> This one is too much high, it make more sense if it is ~60.0C
> 
> If acpi is disabled, does system also get too hot? Yes it does
> Is fan working/operational? Yes it is working 
> I don't think Acer Laptops enables fan control to users
> 
> 
>> hw.acpi.thermal.tz0._HOT: -1
>> hw.acpi.thermal.tz0._CRT: 105.0C
>> hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
> This one looks bogus.
> 
>> hw.acpi.thermal.tz0._TC1: 2
>> hw.acpi.thermal.tz0._TC2: 3
>> hw.acpi.thermal.tz0._TSP: 40
> 
> After executing:
> # hw.acpi.thermal.user_override=1
> Try to modify hw.acpi.thermal.tz0.* values to something more usefull.
> 
> I changed hw.acpi.thermal.tz0._PSV:60.0C
> But the 
> 
> Also could you post output of:
> 
> % sysctl dev.cpu
> 
> dev.cpu.0.%desc: ACPI CPU
> dev.cpu.0.%driver: cpu
> dev.cpu.0.%location: handle=\_PR_.CPU0
> dev.cpu.0.%pnpinfo: _HID=none _UID=0
> dev.cpu.0.%parent: acpi0
> dev.cpu.0.cx_supported: C1/0
> dev.cpu.0.cx_lowest: C1
> dev.cpu.0.cx_usage: 100.00%
> dev.cpu.1.%desc: ACPI CPU
> dev.cpu.1.%driver: cpu
> dev.cpu.1.%location: handle=\_PR_.CPU1
> dev.cpu.1.%pnpinfo: _HID=none _UID=0
> dev.cpu.1.%parent: acpi0
> dev.cpu.1.cx_supported: C1/0
> dev.cpu.1.cx_lowest: C1
> dev.cpu.1.cx_usage: 100.00%
> 
> Also i just noticed:
> starting power_d
> power_d : look up freq not found (or something like that)
> 
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
> 
> 

-- 
View this message in context: http://www.nabble.com/New-AMD-Processor%3ARM-72-tp20498008p20501129.html
Sent from the freebsd-questions mailing list archive at Nabble.com.