Any help about FreeBSD & Dell's Troubleshooting Tool DSET

VeeJay maanjee at gmail.com
Thu Nov 13 04:29:15 PST 2008


If it looks healthy, why there are these errors on the screen? Is it
controller problem or disk?

Regards

VJ

On Thu, Nov 13, 2008 at 9:49 AM, VeeJay <maanjee at gmail.com> wrote:

> Hi Guys
>
> I am running RAID 10.
>
> Here is the dmesg output:
>
> $ dmesg
> Copyright (c) 1992-2008 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>  The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.1-PRERELEASE #0: Fri Aug 29 13:42:13 CEST 2008
>     veejay at server3.03:/usr/src/sys/amd64/compile/KERNEL
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(R) CPU           E5450  @ 3.00GHz (2995.54-MHz K8-class
> CPU)
>   Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0xce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>>
>   AMD Features=0x20100800<SYSCALL,NX,LM>
>   AMD Features2=0x1<LAHF>
>   Cores per package: 4
> usable memory = 17166688256 (16371 MB)
> avail memory  = 16619601920 (15849 MB)
> ACPI APIC Table: <DELL   PE_SC3  >
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>  cpu2 (AP): APIC ID:  2
>  cpu3 (AP): APIC ID:  3
>  cpu4 (AP): APIC ID:  4
>  cpu5 (AP): APIC ID:  5
>  cpu6 (AP): APIC ID:  6
>  cpu7 (AP): APIC ID:  7
> ioapic0: Changing APIC ID to 8
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <DELL PE_SC3> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci4: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
> pci5: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib3
> pcib4: <PCI-PCI bridge> at device 0.0 on pci6
> pci7: <PCI bus> on pcib4
> bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
> 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci7
> miibus0: <MII bus> on bce0
> brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bce0: Ethernet address: 00:1e:c9:d5:88:f0
> bce0: [ITHREAD]
> bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
> (0x04000305); Flags( MFW MSI )
> pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5
> pci8: <ACPI PCI bus> on pcib5
> pcib6: <PCI-PCI bridge> at device 0.3 on pci4
> pci9: <PCI bus> on pcib6
> pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci1: <ACPI PCI bus> on pcib7
> mfi0: <Dell PERC 6> port 0xec00-0xecff mem
> 0xfc680000-0xfc6bffff,0xfc640000-0xfc67ffff irq 16 at device 0.0 on pci1
> mfi0: Megaraid SAS driver Ver 2.00
> mfi0: 2145 (279883150s/0x0020/info) - Shutdown command received from host
> mfi0: 2146 (boot + 3s/0x0020/info) - Firmware initialization started (PCI
> ID 0060/1000/1f0c/1028)
> mfi0: 2147 (boot + 3s/0x0020/info) - Firmware version 1.11.52-0396
> mfi0: 2148 (boot + 3s/0x0008/info) - Battery Present
> mfi0: 2149 (boot + 3s/0x0020/info) - Package version 6.0.2-0002
> mfi0: 2150 (boot + 21s/0x0004/info) - Enclosure (SES) discovered on PD 20(c
> None/p0)
> mfi0: 2151 (boot + 21s/0x0002/info) - Inserted: Encl PD 20
> mfi0: 2152 (boot + 21s/0x0002/info) - Inserted: PD 20(c None/p0) Info:
> enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f03d0c6f00,0000000000000000
> mfi0: 2153 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0)
> mfi0: 2154 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info:
> enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca00904b705,0000000000000000
> mfi0: 2155 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1)
> mfi0: 2156 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info:
> enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca009024231,0000000000000000
> mfi0: 2157 (boot + 21s/0x0002/info) - Inserted: PD 02(e0x20/s2)
> mfi0: 2158 (boot + 21s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info:
> enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca00904d92d,0000000000000000
> mfi0: 2159 (boot + 21s/0x0002/info) - Inserted: PD 03(e0x20/s3)
> mfi0: 2160 (boot + 21s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info:
> enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca009048865,0000000000000000
> mfi0: 2161 (boot + 21s/0x0002/info) - Inserted: PD 04(e0x20/s4)
> mfi0: 2162 (boot + 21s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info:
> enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca009048d2d,0000000000000000
> mfi0: 2163 (boot + 21s/0x0002/info) - Inserted: PD 05(e0x20/s5)
> mfi0: 2164 (boot + 21s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info:
> enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca009048f31,0000000000000000
> mfi0: 2165 (279879506s/0x0020/info) - Time established as 11/13/08
> 8:18:26; (26 seconds since power on)
> mfi0: 2166 (279879548s/0x0008/info) - Battery temperature is normal
> mfi0: [ITHREAD]
> pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci10: <ACPI PCI bus> on pcib8
> pcib9: <PCI-PCI bridge> at device 5.0 on pci0
> pci11: <PCI bus> on pcib9
> pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci12: <ACPI PCI bus> on pcib10
> em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0xdce0-0xdcff mem
> 0xfc3e0000-0xfc3fffff,0xfc3c0000-0xfc3dffff irq 16 at device 0.0 on pci12
> em0: Using MSI interrupt
> em0: [FILTER]
> em0: Ethernet address: 00:15:17:8f:f5:0f
> pcib11: <PCI-PCI bridge> at device 7.0 on pci0
> pci13: <PCI bus> on pcib11
> pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib12
> pcib13: <PCI-PCI bridge> at device 0.0 on pci2
> pci3: <PCI bus> on pcib13
> bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
> 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
> miibus1: <MII bus> on bce1
> brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bce1: Ethernet address: 00:1e:c9:d5:88:ee
> bce1: [ITHREAD]
> bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
> (0x04000305); Flags( MFW MSI )
> uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xbce0-0xbcff
> irq 21 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xbcc0-0xbcdf
> irq 20 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xbca0-0xbcbf
> irq 21 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xbc80-0xbc9f
> irq 20 at device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc700000-0xfc7003ff irq 21
> at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
> uhub4: 8 ports with 8 removable, self powered
> uhub5: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on
> uhub4
> uhub5: multiple transaction translators
> uhub5: 2 ports with 2 removable, self powered
> ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5
> kbd2 at ukbd0
> ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5
> ums0: X report 0x0002 not supported
> device_attach: ums0 attach returned 6
> uhub6: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 4> on
> uhub4
> uhub6: multiple transaction translators
> uhub6: 4 ports with 4 removable, self powered
> pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci14: <ACPI PCI bus> on pcib14
> vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem
> 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci14
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 63XXESB2 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> ata1: [ITHREAD]
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> cpu2: <ACPI CPU> on acpi0
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> cpu3: <ACPI CPU> on acpi0
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> cpu4: <ACPI CPU> on acpi0
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est4 attach returned 6
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> cpu5: <ACPI CPU> on acpi0
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est5 attach returned 6
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> cpu6: <ACPI CPU> on acpi0
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est6 attach returned 6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> cpu7: <ACPI CPU> on acpi0
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 91d091d0600091d
> device_attach: est7 attach returned 6
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> sio1: [FILTER]
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: cannot reserve I/O port range
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AE <http://d.ae/>> at ata0-master
> UDMA33
> mfi0: 2167 (279879548s/0x0008/info) - Current capacity of the battery is
> above threshold
> mfid0: <MFI Logical Disk> on mfi0
> mfid0: 1286016MB (2633760768 sectors) RAID volume '' is optimal
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #5 Launched!
> Trying to mount root from ufs:/dev/mfid0s1a
> WARNING: reducing size to maximum of 67108864 blocks per swap unit
> em0: link state changed to UP
>
>
>
> --
> Thanks!
>
> BR / vj
>



-- 
Thanks!

BR / vj


More information about the freebsd-questions mailing list