apache 2.2.8 uid 80: exited on signal 4

[Mel]

On Friday 14 March 2008 16:32:30 Abdullah Ibn Hamad Al-Marri wrote:
> Hello,
>
> I have this problem with apache 2.2.8, and I don't know the reason yet.
>
> FreeBSD 7.0-STABLE #0: Fri Feb 29 16:57:56 UTC 2008
>     admin at BB.WeArab.Net:/usr/obj/usr/src/sys/BB
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
>  
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
>A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
>   AMD Features=0x20100800<SYSCALL,NX,LM>
>   Logical CPUs per core: 2
> usable memory = 2139377664 (2040 MB)
> avail memory  = 2064826368 (1969 MB)
> ACPI APIC Table: <IntelR AWRDACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> acpi0: <IntelR AWRDACPI> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 7fde0000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
> 0x9000-0x901f mem 0xf9020000-0xf903ffff,0xf9000000-0xf901ffff irq 18 at
> device 1.0 on pci2 em0: Ethernet address: 00:11:d8:ba:51:8d
> em0: [FILTER]
> pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem
> 0xfa000000-0xfaffffff,0xfc000000-0xfc000fff irq 24 at device 2.0 on pci3
> pci0: <serial bus, USB> at device 29.0 (no driver attached)
> pci0: <serial bus, USB> at device 29.1 (no driver attached)
> pci0: <base peripheral> at device 29.4 (no driver attached)
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> atapci0: <Promise PDC20319 SATA150 controller> port
> 0xb000-0xb03f,0xb400-0xb40f,0xb800-0xb87f mem
> 0xfd020000-0xfd020fff,0xfd000000-0xfd01ffff irq 23 at device 4.0 on pci4
> atapci0: [ITHREAD]
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel 6300ESB SATA150 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.2 on
> pci0 ata0: <ATA channel 0> on atapci1
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci1
> ata1: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <multimedia, audio> at device 31.5 (no driver attached)
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0 sio0: type 16550A
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> sio1: [FILTER]
> orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> ad0: 238475MB <WDC WD2500JD-50FYB0 02.05D02> at ata0-master SATA150
> ad4: 238475MB <WDC WD2500JD-50FYB0 02.05D02> at ata2-master SATA150
> ad6: 381554MB <WDC WD4000KD-00NAB0 01.06A01> at ata3-master SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad0s1a
> em0: link state changed to UP
> pid 8458 (httpd), uid 80: exited on signal 4
> pid 82334 (httpd), uid 80: exited on signal 4
> pid 82374 (httpd), uid 80: exited on signal 4
> pid 82375 (httpd), uid 80: exited on signal 4
> pid 82423 (httpd), uid 80: exited on signal 4
> pid 82520 (httpd), uid 80: exited on signal 4
> pid 88487 (httpd), uid 80: exited on signal 4
> pid 98657 (httpd), uid 80: exited on signal 4
> pid 52780 (httpd), uid 80: exited on signal 4
> pid 58619 (httpd), uid 80: exited on signal 4

#define SIGILL          4       /* illegal instr. (not reset when caught) */

If you're sure there are no CPU specific flags set during apache compilation, 
you might want to get a core dump. Is apache the only program creating 
SIGILL?

-- 
Mel

Problem with today's modular software: they start with the modules
    and never get to the software part.