SiS 180 and SATA Hard drives
Jaco le Roux
j4b4ls4d at gmail.com
Fri Mar 7 10:25:13 UTC 2008
Ok I submitted a PR (Yuri):
"It has the internal identification `misc/121461'.
The individual assigned to look at your report is: freebsd-bugs.
You can access the state of your problem report at any time via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=121461 "
On Fri, Mar 7, 2008 at 12:17 PM, Ted Mittelstaedt <tedm at toybox.placo.com> wrote:
>
> Your welcome. Just remember that the developers rarely
> work on problems discussed on the mailing list. They pretty
> much concentrate on what's in the PR system.
>
> Ted
>
>
> > -----Original Message-----
> > From: owner-freebsd-questions at freebsd.org
>
>
> > [mailto:owner-freebsd-questions at freebsd.org]On Behalf Of Jaco le Roux
> > Sent: Friday, March 07, 2008 1:50 AM
> > To: freebsd-questions at freebsd.org
> > Subject: Re: SiS 180 and SATA Hard drives
> >
> >
> > Ah if I had been around that time, I would have tested it with
> > pleasure. Unfortunately I only started using FreeBSD little more than
> > a month ago. I will try and do as you said, Thanks for the help.
> > On Fri, Mar 7, 2008 at 11:42 AM, Ted Mittelstaedt
> > <tedm at toybox.placo.com> wrote:
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: owner-freebsd-questions at freebsd.org
> > > > [mailto:owner-freebsd-questions at freebsd.org]On Behalf Of Yuri Pankov
> > > > Sent: Friday, March 07, 2008 1:04 AM
> > > > To: Jaco le Roux
> > > > Cc: freebsd-questions at freebsd.org
> > > > Subject: Re: SiS 180 and SATA Hard drives
> > > >
> > > >
> > > > On Fri, Mar 07, 2008 at 09:50:23AM +0200, Jaco le Roux wrote:
> > > > > Hi, I already sent a message to hardware@, I'm hoping I
> > might find a
> > > > > response here
> > > > >
> > > > > I have an Asus P4S-800D motherboard with SATA hard drives
> > running from
> > > > > a SiS 180/181 RAID Controller (VEN_1039 & DEV_0180, according to
> > > > > Windows XP). They are not set to RAID mode however, it is merely a
> > > > > RAID controllor taking charge of the SATA hard drives. My
> > problem is
> > > > > the following: when I enter 'sysinstall' and do a Standard Install,
> > > > > freebsd does not detect any hard disks. According to the
> > 'ata(4)' man
> > > > > page, the SiS 180 controller is supported and I see the controller
> > > > > detected/being loaded at boot time. I have links to other people
> > > > > experiencing similar problems too:
> > > > >
> > > > >
> > http://monkey.org/freebsd/archive/freebsd-bugs/200510/msg00208.html
> > > > >
> > http://monkey.org/freebsd/archive/freebsd-bugs/200707/msg00265.html
> > > > >
> > > > > And a few others of which I lost the urls. I have also
> > tried this on
> > > > > both RELEASE of 6.3 and 7.0. Does anyone have any ideas?
> > > > >
> > > > > Thanks, much appreciated
> > > >
> > > > Just a "me too".
> > > >
> > > > http://lists.freebsd.org/pipermail/freebsd-stable/2007-November/03
> > > 8203.html
> > >
> > > To both of you:
> > >
> > > Soren posted a patch here:
> > >
> > > http://www.freebsd.org/cgi/query-pr.cgi?pr=87585&cat=
> > >
> > > and neither of you apparently tested, thus Soren put the
> > > fix in and closed the PR
> > >
> > > One of you needs to file a new PR, and reference the old one
> > > kern/87585, and then the other one of you needs to submit
> > > followup - that way, both of you will have your e-mail
> > > addresses tied to the new PR, and this time, when the maintainer
> > > writes a patch, you need to test it.
> > >
> > > Ted
> > >
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to
> > "freebsd-questions-unsubscribe at freebsd.org"
> >
>
>
More information about the freebsd-questions
mailing list