Howto get k3b to detect my Burner
Warren Liddell
shinjii at maydias.com
Sat Jun 28 23:34:34 UTC 2008
> Your running kernel is compiled with the "device atapicam" option
> because AFAIK k3b only works with scsi.
yes i have that in my kernel
> I have the following lines in this computers /etc/devfs.conf
>
link acd0 cdrom
link acd0 cd0
perm acd0 0777
perm cd0 0777
perm xpt0 0777
perm pass0 0777
i have the above in my devfs file
> I am running
cdrtools-devel
k3b-1.0.4_3
I also have vfs.usermount=1 set in my sysctl.conf
I have a line in my fstab
/dev/cd0 /cdrom cd9660 ro,noauto 0 0
/dev/cd0 /usr/home/<user>/cdrom cd9660 ro,noauto,nodev,nosuid
0 0
And yet with all this, it dosent detect it and wheni try to manually add the
device through configure in k3b it dosent see it.
Since adding atapicam in the kernel rather then a manual load my dmesg has
this error...
acd0: DVDR <TSSTcorp CDDVDW SH-S203D/SB00> at ata2-master SATA150
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20071129_0050>
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <LEXAR JUMPDRIVE SECURE 3000> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 991MB (2030592 512 byte sectors: 64H 32S/T 991C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-S203D SB00> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: cd present [278528 x 2048 byte records]
More information about the freebsd-questions
mailing list