7.0 installation problem

Tue Feb 5 08:17:24 UTC 2008

it is detected, but you may need to give options to moused (if you run it) 
to know to get usb not ps2 mouse, or in xorg.conf

On Tue, 5 Feb 2008, FreeBSD User wrote:

> Hi there,
>
> I got X working -- I went into sysinstall and installed one of the NVIDIA
> drivers.
>
> No luck with the mouse.  Here is my dmesg:
>
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>       The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.0-RC1 #0: Mon Dec 24 10:10:07 UTC 2007
>   root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (2402.42-MHz K8-class
> CPU)
> Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
> Features=0xbfebfbff<FPU,VME,DE
> ,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 4
> usable memory = 4280856576 (4082 MB)
> avail memory  = 4119498752 (3928 MB)
> ACPI APIC Table: <GBT    GBTUACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  2
> cpu3 (AP): APIC ID:  3
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> hptrr: HPT RocketRAID controller driver v1.1 (Dec 24 2007 10:08:39)
> acpi0: <GBT GBTUACPI> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, cfde0000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> cpu0: <ACPI CPU> on acpi0
> acpi_perf0: <ACPI CPU Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 928092806000928
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> cpu2: <ACPI CPU> on acpi0
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 928092806000928
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> cpu3: <ACPI CPU> on acpi0
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 928092806000928
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0x9000-0x907f mem
> 0xe6000000-0xe6ffffff,0xd0000000-0xdfffffff,0xe4000000-0xe5ffffff irq 16 at
> device 0.0 on pci1
> uhci0: <UHCI (generic) USB controller> port 0xe500-0xe51f irq 16 at device
> 26.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 21 at device
> 26.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0xe100-0xe11f irq 18 at device
> 26.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xee101000-0xee1013ff irq 18
> at device 26.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <EHCI (generic) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
> uhub3: 6 ports with 6 removable, self powered
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib3
> em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
> 0xa000-0xa01f mem 0xe9020000-0xe903ffff,0xe9000000-0xe901ffff irq 17 at
> device 0.0 on pci3
> em0: Using MSI interrupt
> em0: Ethernet address: 00:1b:21:05:14:8e
> em0: [FILTER]
> pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
> pci4: <ACPI PCI bus> on pcib4
> atapci0: <JMicron JMB363 SATA300 controller> port
> 0xb000-0xb007,0xb100-0xb103,0xb200-0xb207,0xb300-0xb303,0xb400-0xb40f mem
> 0xee000000-0xee001fff irq 19 at device 0.0 on pci4
> atapci0: [ITHREAD]
> atapci0: AHCI called from vendor specific driver
> atapci0: AHCI Version 01.00 controller with 2 ports detected
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci5: <ACPI PCI bus> on pcib5
> uhci3: <UHCI (generic) USB controller> port 0xe200-0xe21f irq 23 at device
> 29.0 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xe300-0xe31f irq 19 at device
> 29.1 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub5: 2 ports with 2 removable, self powered
> uhci5: <UHCI (generic) USB controller> port 0xe400-0xe41f irq 18 at device
> 29.2 on pci0
> uhci5: [GIANT-LOCKED]
> uhci5: [ITHREAD]
> usb6: <UHCI (generic) USB controller> on uhci5
> usb6: USB revision 1.0
> uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
> uhub6: 2 ports with 2 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xee100000-0xee1003ff irq 23
> at device 29.7 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb7: EHCI version 1.0
> usb7: companion controllers, 2 ports each: usb4 usb5 usb6
> usb7: <EHCI (generic) USB 2.0 controller> on ehci1
> usb7: USB revision 2.0
> uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
> uhub7: 6 ports with 6 removable, self powered
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci6: <ACPI PCI bus> on pcib6
> ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd000-0xd0ff mem
> 0xed000000-0xed000fff irq 19 at device 1.0 on pci6
> ahc0: [ITHREAD]
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd100-0xd1ff mem
> 0xed001000-0xed001fff irq 18 at device 1.1 on pci6
> ahc1: [ITHREAD]
> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel AHCI controller> port
> 0xe600-0xe607,0xe700-0xe703,0xe800-0xe807,0xe900-0xe903,0xea00-0xea1f mem
> 0xee102000-0xee1027ff irq 19 at device 31.2 on pci0
> atapci1: [ITHREAD]
> atapci1: AHCI Version 01.20 controller with 6 ports detected
> ata5: <ATA channel 0> on atapci1
> ata5: [ITHREAD]
> ata6: <ATA channel 1> on atapci1
> ata6: [ITHREAD]
> ata7: <ATA channel 2> on atapci1
> ata7: [ITHREAD]
> ata8: <ATA channel 3> on atapci1
> ata8: [ITHREAD]
> ata9: <ATA channel 4> on atapci1
> ata9: [ITHREAD]
> ata10: <ATA channel 5> on atapci1
> ata10: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio0: [FILTER]
> orm0: <ISA Option ROM> at iomem 0xd0000-0xd1fff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: cannot reserve I/O port range
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ums0: <Microsoft Microsoft Optical Mouse with Tilt Wheel, class 0/0, rev
> 2.00/1.20, addr 2> on uhub4
> ums0: 3 buttons and Z dir and a TILT dir.
> ukbd0: <Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev
> 2.00/1.73,
> addr 3> on uhub4
> kbd2 at ukbd0
> uhid0: <Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev
> 2.00/1.73,
> addr 3> on uhub4
> Timecounters tick every 1.000 msec
> hptrr: no controller detected.
> Waiting 5 seconds for SCSI devices to settle
> acd0: DVDR <NEC DVD RW ND-3520A/1.04> at ata4-slave UDMA33
> ad10: 238474MB <Seagate ST3250824AS 3.AAH> at ata5-master SATA300
> ad12: 152627MB <WDC WD1600JS-00SGB0 20.06C03> at ata6-master SATA300
> ad14: 715403MB <Hitachi HDS721075KLA330 GK8OA70M> at ata7-master SATA300
> ad16: 715404MB <Hitachi HDS721075KLA330 GK8OA70M> at ata8-master SATA300
> ad18: 715404MB <Hitachi HDS721075KLA330 GK8OA70M> at ata9-master SATA300
> ad20: 715404MB <Hitachi HDS721075KLA330 GK8OA70M> at ata10-master SATA300
> GEOM: ad14: corrupt or invalid GPT detected.
> GEOM: ad14: GPT rejected -- may not be recoverable.
> GEOM: ad16: corrupt or invalid GPT detected.
> GEOM: ad16: GPT rejected -- may not be recoverable.
> GEOM: ad18: corrupt or invalid GPT detected.
> GEOM: ad18: GPT rejected -- may not be recoverable.
> GEOM: ad20: corrupt or invalid GPT detected.
> GEOM: ad20: GPT rejected -- may not be recoverable.
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> Trying to mount root from ufs:/dev/ad12s1a
>
>
> On 1/30/08, Jonathan Chen <jonc at chen.org.nz> wrote:
>>
>> On Wed, Jan 30, 2008 at 09:53:14AM -0500, FreeBSD User wrote:
>>
>> [...]
>>> Problem 2:
>>> I cannot get X started.  I get the following errors:
>>>
>>> Failed to load module "nv" (module does not exist, 0)
>>> Failed to load module "mouse" (module does not exist, 0)
>>> Failed to load module "kbd" (module does not exist, 0)
>>
>> Make sure you install X by using the meta-port x11/xorg. You'll miss
>> stuff out if you install by hand.
>> --
>> Jonathan Chen <jonc at chen.org.nz>
>> -----------------------------------------------------------------------
>> "One, with God, is always a majority, but many a martyr has been burned
>>    at the stake while the votes were being counted."  -- Thomas B. Reed
>>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
>