Re: Intel® G31 + ICH7

[Gordon McKee]

Hi

Here you go!!

pciconf -lv |grep -A4 '^none'
none0 at pci0:2:0: class=0x030000 card=0x0df7105b chip=0x29c28086 rev=0x02 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Integrated Graphics Controller'
    class      = display
    subclass   = VGA
--
none1 at pci0:31:3:        class=0x0c0500 card=0x0df7105b chip=0x27da8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
none2 at pci3:0:0: class=0x020000 card=0x0df7105b chip=0x816810ec rev=0x01 
hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    class      = network
    subclass   = ethernet

I was trying a ata disk, but the sata interface seems to work.

Here is a pciconf without the grep!!
pciconf -lv
hostb0 at pci0:0:0:        class=0x060000 card=0x29c08086 chip=0x29c08086 
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Processor to I/O Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x0df7105b chip=0x29c18086 rev=0x02 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
none0 at pci0:2:0: class=0x030000 card=0x0df7105b chip=0x29c28086 rev=0x02 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '(Bearlake) Integrated Graphics Controller'
    class      = display
    subclass   = VGA
pcib2 at pci0:28:0:        class=0x060400 card=0x27d08086 chip=0x27d08086 
rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib3 at pci0:28:1:        class=0x060400 card=0x27d28086 chip=0x27d28086 
rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
uhci0 at pci0:29:0:        class=0x0c0300 card=0x0df7105b chip=0x27c88086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci1 at pci0:29:1:        class=0x0c0300 card=0x0df7105b chip=0x27c98086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci2 at pci0:29:2:        class=0x0c0300 card=0x0df7105b chip=0x27ca8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci3 at pci0:29:3:        class=0x0c0300 card=0x0df7105b chip=0x27cb8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
ehci0 at pci0:29:7:        class=0x0c0320 card=0x0df7105b chip=0x27cc8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib4 at pci0:30:0:        class=0x060401 card=0x0df7105b chip=0x244e8086 
rev=0xe1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub 
Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0 at pci0:31:0:        class=0x060100 card=0x0df7105b chip=0x27b88086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '945GL Intel 82801GB/GR (ICH7 Family) LPC Interface 
Controller - 27B8'
    class      = bridge
    subclass   = PCI-ISA
atapci0 at pci0:31:1:      class=0x01018a card=0x0df7105b chip=0x27df8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) Ultra ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
atapci1 at pci0:31:2:      class=0x01018f card=0x0df7105b chip=0x27c08086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
none1 at pci0:31:3:        class=0x0c0500 card=0x0df7105b chip=0x27da8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
none2 at pci3:0:0: class=0x020000 card=0x0df7105b chip=0x816810ec rev=0x01 
hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    class      = network
    subclass   = ethernet
re0 at pci4:2:0:   class=0x020000 card=0x311a1385 chip=0x816910ec rev=0x10 
hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller'
    class      = network
    subclass   = ethernet



Many thanks

Gordon


----- Original Message ----- 
From: "Mel" <fbsd.questions at rachie.is-a-geek.net>
To: <freebsd-questions at freebsd.org>
Cc: "Gordon McKee" <fbsdstble at gdmckee.com>
Sent: Saturday, February 02, 2008 1:43 PM
Subject: Re: Intel® G31 + ICH7


> On Saturday 02 February 2008 11:14:04 Gordon McKee wrote:
>> Hi
>>
>> Does anyone know how to get FreeBSD to work with the above chipset.
>> Tried
>> 6.3 and 7 ISO images.  Get lots of disk and no NIC is detected.
>>
>> I have
>> http://www.foxconnchannel.com/product/Motherboards/detail_spec.aspx?ID=en-u
>>s0000345.
>
> RTL8111B should be supported with rl driver. Apparently it's not detected,
> so
> a pciconf -lv |grep -A4 '^none' would help greatly.
>
> -- 
> Mel
>