CUPS and Gnome

[Jason Lenthe]

I am using CUPS and when I click the "Print" button in gedit and 
gnumeric the application immediately terminates.  In abiword, I get a 
blank sheet of paper.  Printing is working fine in firefox, gvim, and lpr.

I did "truss gedit" and it ended with:

open("/etc/cups/lpoptions",O_RDONLY,0666)        ERR#2 'No such file or 
directory'
open("/home/lenthe/.lpoptions",O_RDONLY,0666)    ERR#2 'No such file or 
directory'
open("/home/lenthe/.cups/lpoptions",O_RDONLY,0666) = 16 (0x10)
SIGNAL 11 (SIGSEGV)
write(3,"^\^X\b\0000\^A`\^BH\0`\^BH\0`\^B"...,64) = 64 (0x40)
write(3," \^X\^B\0\0\0\0\0",8)                   = 8 (0x8)
write(3,"%\^X\^A\0+\0\^A\0",8)                   = 8 (0x8)
read(3,"\^F\^A\M-?\^F\M-o\fF\^Cv\0\0\0"...,32)   = 32 (0x20)
read(3,"\^A\^B\M-F\^F\0\0\0\0\^_\0`\^B\0"...,32) = 32 (0x20)
write(3,"\^[\^X\^B\0\0\0\0\0",8)                 = 8 (0x8)
write(3," \^X\^B\0\0\0\0\0",8)                   = 8 (0x8)
write(3,"%\^X\^A\0+\0\^A\0",8)                   = 8 (0x8)
read(3,"\^A\^B\M-J\^F\0\0\0\0\^_\0`\^B\0"...,32) = 32 (0x20)
getpid(0x8058fe568,0x8058fe568,0x0,0x806101120,0xffffffff80a4e2a0,0x1) = 
61242 (0xef3a)
access("/usr/local/bin/gdb",1)                   ERR#2 'No such file or 
directory'
access("/sbin/gdb",1)                            ERR#2 'No such file or 
directory'
access("/bin/gdb",1)                             ERR#2 'No such file or 
directory'
access("/usr/sbin/gdb",1)                        ERR#2 'No such file or 
directory'
access("/usr/bin/gdb",1)                         = 0 (0x0)
getuid(0x807b17ff0,0x1,0x8,0x805efeb8c,0xffffffff80a4e2a0,0x7fffffffaed8) 
= 1001 (0x3e9)
stat("/usr/bin/gdb",{mode=-r-xr-xr-x 
,inode=117986,size=2364976,blksize=4096}) = 0 (0x0)
readlink("/proc/curproc/file","/usr/local/bin/gedit",255) = 20 (0x14)
open("/usr/local/bin/gedit",O_RDONLY,00)         = 17 (0x11)
fstat(17,{mode=-r-xr-xr-x ,inode=342182,size=643224,blksize=4096}) = 0 (0x0)
mmap(0x0,643224,PROT_READ,MAP_PRIVATE,17,0x0)    = 34487672832 (0x807a02000)
munmap(0x807a02000,643224)                       = 0 (0x0)
process exit, rval = 1

All of my ports are up to date.

Any ideas?

Thanks,
Jason