agp and vr problems in 7.0-RELEASE

[Novembre]

On Sun, Apr 13, 2008 at 4:45 PM, Novembre <novembre at gmail.com> wrote:

>
> Hi all,
>
> I have upgraded my home desktop (1.4GHz P-IIIS) machine from
> 6.2-RELEASE-p9 to 7.0-RELEASE some time ago. When comparing the two dmesg
> outputs from 6.2 and 7.0, I realized that some things aren't the same
> anymore.
>
> (1) probing agp gives the following messages
> ----------
> 6.2-RELEASE-p9:
> pci0: <ACPI PCI bus> on pcib0
> agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe0000000-0xe0ffffff at
> device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
>
> 7.0-RELEASE:
> pci0: <ACPI PCI bus> on pcib0
> agp0: <VIA 862x (CLE266) host to PCI bridge> on hostb0
> agp0: Invalid aperture setting 0x0agp0: Invalid aperture setting 0x0agp0:
> bad aperture size
> agp0: Invalid aperture setting 0x0agp0: Invalid aperture size (0Mb)
> device_attach: agp0 attach returned 12
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vgapci0: <VGA-compatible display> mem
> 0xd8000000-0xdbffffff,0xde000000-0xdeffffff at device 0.0 on pci1
> ----------
> So what are the errors "agp0: Invalid aperture setting 0x0" and "agp0: bad
> aperture size (0Mb)" and "device_attach: agp0 attach returned 12" that I see
> in 7.0-RELEASE? I assume that agp driver is not attached, so there's
> something wrong with its implementation in 7.0, right?
>
>
> (2) probing vr gives the following messages
> ----------
> 6.2-RELEASE-p9:
> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem
> 0xdfffde00-0xdfffdeff irq 23 at device 18.0 on pci0
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: Ethernet address: 00:11:5b:1c:25:e2
>
>
> 7.0-RELEASE:
> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem
> 0xdfffde00-0xdfffdeff irq 23 at device 18.0 on pci0
> vr0: Quirks: 0x0
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: using obsoleted if_watchdog interface
> vr0: Ethernet address: 00:11:5b:1c:25:e2
> vr0: [ITHREAD]
> ----------
> What are the new "vr0: Quirks: 0x0" and "vr0: using obsoleted if_watchdog
> interface" messages in 7.0-RELEASE? Are they to be ignored?
>
>
> I have uploaded the complete dmesg's to
> 6.2-RELEASE dmesg :    http://pastebin.com/f12c0ff27
> 7.0-RELEASE dmesg :    http://pastebin.com/f3e6809c6
>
> Thanks a lot :)
>
>


any ideas?! nobody gets this sort of errors (especially the agp one) on
his/her machine?!