multihome network

[alexus]

i'm pretty sure you can do it on freebsd, especially if its possible
on Linux, routing works same way as on Linux

On Nov 16, 2007 4:51 PM, Bram Van Steenlandt <bram at diomedia.be> wrote:
>
> alexus wrote:
> > i dont see any difference as at the end i still get this
> >
> > 216.112.241.24/29  216.112.241.25     UGS         0        0   fxp1
> >
> > in my netstat -rn, and no its still doesn't work...
> >
> >
> >
> > On Nov 16, 2007 12:07 PM, Steve Bertrand <iaccounts at ibctech.ca> wrote:
> >
> >> alexus wrote:
> >>
> >>> my private IP that eventually resolves to public IP through PIX is
> >>> different then coming from my other public IP that assigned on my fxp1
> >>> that comes from another ISP, the fxp1 IP already configured this way
> >>> so it pass everything to my box
> >>>
> >>> what i've tried is adding route on my box
> >>>
> >>> route add 216.112.241.24 216.112.241.25 255.255.255.248
> >>>
> >> Wait a minute...this doesn't look right...
> >>
> >> Try this:
> >>
> >> # route add $homeIP/$netmask $gateway
> >>
> >> Where:
> >>
> >> - if you have a static IP at 'home', $netmask should be /32, otherwise,
> >> you'll need to shorten the prefix (such like /24) This will depend on
> >> your 'home' Internet provider setup
> >>
> >> - $gateway is the next hop upstream on the interface that has
> >> 216.112.241.x address on it.
> >>
> >> Steve
> >>
> >>
> >
> >
> >
> >
> I'm kind of new to freebsd so forgive me if I'm wrong but I thought this
> was not possible with freebsd in a simple way.
> On linux you can create a default route for each interface thus packet
> get routed properly, on freebsd you can only have one default route (I
> think) so this is not really possible.
>
>
>



-- 
http://alexus.org/