what's wrong with rtadvd?!
Wojciech Puchar
wojtek at wojtek.tensor.gdynia.pl
Sun Nov 11 00:13:29 PST 2007
on 3 machines - works fine.
on one - doesn't
tcpdump -i em0 -n ip6 shows nothing transmitted
ifconfig em0 shows
em0: flags=88843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,STATICARP> mtu
1500
options=4b<RXCSUM,TXCSUM,VLAN_MTU,POLLING>
inet6 fe80::21b:21ff:fe00:9e16%em0 prefixlen 64 duplicated scopeid
0x1
inet 10.254.1.248 netmask 0xfffffc00 broadcast 10.254.3.255
inet 10.254.1.232 netmask 0xfffffc00 broadcast 10.254.3.255
inet6 xxxxxxx::2 prefixlen 64
inet6 xxxxxxx::3 prefixlen 64
inet6 xxxxxxx::4 prefixlen 64
ether 00:1b:21:00:9e:16
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
in rc.conf
rtadvd_enable="YES"
rtadvd_interfaces="em0"
when rtadvd is started, stopped or sometimes in between there are such
things in log:
rtadvd[68450]: <ra_output> sendmsg on em0: Network is down
where's a problem?
thanks.
PS. no - firewall doesn't block it, i checked and tried with ipfw turned
off too.
More information about the freebsd-questions
mailing list