Easier way to install on 3ware 9550 card?
Mike Tancsa
mike at sentex.net
Wed Jan 3 17:48:24 PST 2007
On Wed, 3 Jan 2007 02:56:40 -0500 (EST), in
sentex.lists.freebsd.questions you wrote:
>
>4) Allowing non-standard modules to reside on the CD, instead of loading
>from floppy (i.e. I see there's a twa module in the base system, why
>aren't the .ko's sitting around easily-accessible for sysinstall?)
>
>If I'm missing some really obvious way of doing this, please let me know.
What version of FreeBSD are you trying to install ? I thought 6.2RC2
would work with this controller
HARDWARE
The twa driver supports the following SATA RAID controllers:
o AMCC's 3ware 9500S-4LP
o AMCC's 3ware 9500S-8
o AMCC's 3ware 9500S-8MI
o AMCC's 3ware 9500S-12
o AMCC's 3ware 9500S-12MI
o AMCC's 3ware 9500SX-4LP
o AMCC's 3ware 9500SX-8LP
o AMCC's 3ware 9500SX-12
o AMCC's 3ware 9500SX-12MI
o AMCC's 3ware 9500SX-16ML
o AMCC's 3ware 9550SX-4LP
o AMCC's 3ware 9550SX-8LP
o AMCC's 3ware 9550SX-12
o AMCC's 3ware 9550SX-12MI
o AMCC's 3ware 9550SX-16ML
I am running with
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9550SX-4LP DISK 3.01> Fixed Direct Access SCSI-3 device
da0: 100.000MB/s transfers
da0: 152566MB (312455168 512 byte sectors: 255H 63S/T 19449C)
---Mike
--------------------------------------------------------
Mike Tancsa, Sentex communications http://www.sentex.net
Providing Internet Access since 1994
mike at sentex.net, (http://www.tancsa.com)
More information about the freebsd-questions
mailing list