phpMyAdmin httpd segmentation fault
Spil Oss
spil.oss at googlemail.com
Sun Feb 11 01:09:25 UTC 2007
So much for that fix, no luck at all..... :'(
</monologue>
On 11/02/07, Spil Oss <spil.oss at googlemail.com> wrote:
> Maybe things will work after all :D
>
>
> Port count: 16514 http://www.FreshPorts.org/categories.php
> New ports: 5 http://www.FreshPorts.org/ports-new.php?interval=today
>
> www/eaccelerator
> Fix for PHP 5.2.x.
>
> PR: ports/109012
> Submitted by: Martin Matuska <martin at matuska.org>
> Obtained from: eaccelerator SVN
> 10 Feb 2007 - ale
> http://www.freshports.org/www/eaccelerator/
>
> Kind regards,
>
> Spil
>
> On 11/02/07, Spil Oss <spil.oss at googlemail.com> wrote:
> > Sorry for that....
> >
> > Just tried phpMyAdmin here, and all I get is a blank page :'(
> > Apache doesn't segfault though :D (on the bright side)
> >
> > Cheers,
> >
> > Spil
> >
> > On 10/02/07, Terry Todd <tlt at badger.tltodd.com> wrote:
> > >
> > >
> > > Spil,
> > >
> > > Thanks for the pointers. I tried reordering extensions.ini and
> > > even cutting it down to a minimul set and then down to just session
> > > and mysql and it still segfaults apache whenever I try to browse
> > > to phpMyAdmin/index.php.
> > >
> > > On both of these systems that I have built I did build most all of
> > > the php extensions figuring I would need them at some time or other
> > > later on. Both systems are very vanilla out of the box 6.2 and
> > > ports setups.
> > >
> > > I do have INET6 compiled in the way it comes out of the box for 6.2
> > > and ports.
> > >
> > > Terry Todd
> > >
> > >
> > > On Sat, Feb 10, 2007 at 08:04:26PM +0100, Spil Oss wrote:
> > > > Hi Terry,
> > > >
> > > > Had a segfaulting apache-2.2.3 w/ php 5.2.0 before after upgrading
> > > > 5.1.6_3 to 5.2.0. mail/roundcube would segfault on login.
> > > > My problem was that I had NO_INET6 in my kernel, but no WITHOUT_IPV6
> > > > for my ports. Solved segfaulting apache and connection-probs in
> > > > bitlbee.
> > > >
> > > > Furthermore, I am told that the order in which the php-extensions load
> > > > is essential, see e.g.
> > > > http://www.pingle.org/2006/10/18/php-crashes-extensions/,
> > > > http://nl2.php.net/manual/en/ref.recode.php (empty????),
> > > > http://www.php.net/manual/en/ref.mysql.php
> > > >
> > > > Currently I'm stuck again, with apache 2.2.4, php 5.2.1 and
> > > > mail/roundcube webmail after upgrading php from 5.2.0 to 5.2.1 :'(
> > > >
> > > > Earlier, a debug build of php did not exhibit problems for me (nice if
> > > > you wanna nail down the bug). Hope this all brings you any further in
> > > > solving your probs
> > > >
> > > > Kind regards,
> > > >
> > > > Spil
> > > > On 10/02/07, Terry Todd <tlt at badger.tltodd.com> wrote:
> > > > >
> > > > >
> > > > >
> > > > > I started from scratch and built a completely new system by installing
> > > > > from CD's on a different computer and it does the exact same thing
> > > > > in the exact same place. At this point I'm a little surprised that
> > > > > no one else has run across this.
> > > > >
> > > > > Terry Todd
> > > > >
> > > > >
> > > > > On Tue, Feb 06, 2007 at 08:42:30AM -0600, Terry Todd wrote:
> > > > > > On Tue, Feb 06, 2007 at 07:14:02AM +0000, Matthew Seaman wrote:
> > > > > > > Terry Todd wrote:
> > > > > > > > On Mon, Feb 05, 2007 at 07:07:25AM -0800, Garrett Cooper wrote:
> > > > > > > >> Terry Todd wrote:
> > > > > > > >>> On Sun, Feb 04, 2007 at 09:36:58AM +0000, Matthew Seaman wrote:
> > > > > > > >>>> Terry Todd wrote:
> > > > > > > >>>>> I installed FreeBSD 6.2-RELEASE, php-5.1.6_3, php5-extensions-1.0,
> > > >
> > > > > > > >>>>> mysql-5.0.27 and apache_1.3.37_1.
> > > > > > > >>>>>
> > > > > > > >>>>> php -i now works Ok after I moved recode.so to the top of the list
> > > > > > > >>>>> of extensions in extensions.ini. It took a while to figure that
> > > > > > > >>>>> one out. Before that php -i would seg fault and core dump. It
> > > > > > > >>>>> took some google searching and using gdb on the core file to fix
> > > > > > > >>>>> it.
> > > > > > > >>>>>
> > > > > > > >>>>> A test web page for phpinfo works fine too. Mysql works OK from
> > > > > > > >>>>> the command line.
> > > > > > > >>>>>
> > > > > > > >>>>> However I can't get phpMyAdmin to work. It seg faults in reading
> > > > > > > >>>>> /usr/local/www/phpMyAdmin/libraries/url_generating.lib.php
> > > > > > > >>>>> There is no core dump produced.
> > > > > > > >>>> Hmmm... very strange. We have just built a RELENG_6_2 server with
> > > > > > > >>>> apache13-ssl, php5 and phpMyAdmin and no such problems are apparent.
> > > > > > > >>>>
> > > > > > > >>>> Did you modify the CFLAGS or otherwise change the level of
> > > > > > > >>>> optimization used by the compiler?
> > > > > > > >>> No CFLAGS were changed or anything else. It's a very standard install.
> > > > > > > >>>
> > > > > > > >>>>> I ran ktrace httpd -X
> > > > > > > >>>>>
> > > > > > > >>>>> Then when I try to open the phpMyAdmin/index.php page in a browser
> > > > > > > >>>>> httpd seg faults.
> > > > > > > >>>>>
> > > > > > > >>>>> Here is the tail of kdump from the ktrace.out from the above ktrace.
> > > > > > > >>>>>
> > > > > > > >>>>> ....
> > > > > > > >>>>> 1372 httpd CALL gettimeofday(0xbfbf7158,0)
> > > > > > > >>>>> 1372 httpd RET gettimeofday 0
> > > > > > > >>>>> 1372 httpd CALL lstat(0xbfbf75b0,0xbfbf70f0)
> > > > > > > >>>>> 1372 httpd NAMI "/usr"
> > > > > > > >>>>> 1372 httpd RET lstat 0
> > > > > > > >>>>> 1372 httpd CALL lstat(0xbfbf75b0,0xbfbf70f0)
> > > > > > > >>>>> 1372 httpd NAMI "/usr/local"
> > > > > > > >>>>> 1372 httpd RET lstat 0
> > > > > > > >>>>> 1372 httpd CALL lstat(0xbfbf75b0,0xbfbf70f0)
> > > > > > > >>>>> 1372 httpd NAMI "/usr/local/www"
> > > > > > > >>>>> 1372 httpd RET lstat 0
> > > > > > > >>>>> 1372 httpd CALL lstat(0xbfbf75b0,0xbfbf70f0)
> > > > > > > >>>>> 1372 httpd NAMI "/usr/local/www/phpMyAdmin"
> > > > > > > >>>>> 1372 httpd RET lstat 0
> > > > > > > >>>>> 1372 httpd CALL lstat(0xbfbf75b0,0xbfbf70f0)
> > > > > > > >>>>> 1372 httpd NAMI "/usr/local/www/phpMyAdmin/libraries"
> > > > > > > >>>>> 1372 httpd RET lstat 0
> > > > > > > >>>>> 1372 httpd CALL lstat(0xbfbf75b0,0xbfbf70f0)
> > > > > > > >>>>> 1372 httpd NAMI "/usr/local/www/phpMyAdmin/libraries/url_generating.lib.php"
> > > > > > > >>>>> 1372 httpd RET lstat 0
> > > > > > > >>>>> 1372 httpd CALL open(0x845eda8,0,0x1b6)
> > > > > > > >>>>> 1372 httpd NAMI "/usr/local/www/phpMyAdmin/libraries/url_generating.lib.php"
> > > > > > > >>>>> 1372 httpd RET open 4
> > > > > > > >>>>> 1372 httpd CALL fstat(0x4,0x8102748)
> > > > > > > >>>>> 1372 httpd RET fstat 0
> > > > > > > >>>>> 1372 httpd CALL lseek(0x4,0,0,0,0x1)
> > > > > > > >>>>> 1372 httpd RET lseek 0
> > > > > > > >>>>> 1372 httpd CALL read(0x4,0x82e3028,0x2000)
> > > > > > > >>>>> 1372 httpd GIO fd 4 read 4096 bytes
> > > > > > > >>>>> "<?php
> > > > > > > >>>>> /* $Id: url_generating.lib.php,v 2.12.2.1 2006/09/26 19:23:24 lem9 Exp $ */
> > > > > > > >>>>> // vim: expandtab sw=4 ts=4 sts=4:
> > > > > > > >>>>>
> > > > > > > >>>>>
> > > > > > > >>>>> /**
> > > > > > > >>>>> * URL/hidden inputs generating.
> > > > > > > >>>>> */
> > > > > > > >>>>>
> > > > > > > >>>>>
> > > > > > > >>>>> /**
> > > > > > > >>>>> * Generates text with hidden inputs.
> > > > > > > >>>>> *
> > > > > > > >>>>> * @see PMA_generate_common_url()
> > > > > > > >>>>> * @param string optional database name
> > > > > > > >>>>> * @param string optional table name
> > > > > > > >>>>> * @param int indenting level
> > > > > > > >>>>> *
> > > > > > > >>>>> * @return string string with input fields
> > > > > > > >>>>> *
> > > > > > > >>>>> * @global string the current language
> > > > > > > >>>>> * @global string the current conversion charset
> > > > > > > >>>>> * @global string the current connection collation
> > > > > > > >>>>> * @global string the current server
> > > > > > > >>>>> * @global array the configuration array
> > > > > > > >>>>> * @global boolean whether recoding is allowed or not
> > > > > > > >>>>> *
> > > > > > > >>>>> *
> > > > > > > >>>>> * @access public
> > > > > > > >>>>> *
> > > > > > > >>>>> * @author nijel
> > > > > > > >>>>> */
> > > > > > > >>>>> function PMA_generate_common_hidden_inputs($db = '', $table = '', $indent = 0, $skip = array())
> > > > > > > >>>>> {
> > > > > > > >>>>> if (is_array($db)) {
> > > > > > > >>>>> $params =& $db;
> > > > > > > >>>>> $_indent = empty($table) ? $indent : $table;
> > > > > > > >>>>> $_skip = empty($indent) ? $skip : $indent;
> > > > > > > >>>>> $indent =& $_indent;
> > > > > > > >>>>> $skip =& $_skip;
> > > > > > > >>>>> } else {
> > > > > > > >>>>> $params = array();
> > > > > > > >>>>> if (isset($db) && strlen($db)) {
> > > > > > > >>>>> $params['db'] = $db;
> > > > > > > >>>>> }
> > > > > > > >>>>> if (isset($table) && strlen($table)) {
> > > > > > > >>>>> $params['table'] = $table;
> > > > > > > >>>>> }
> > > > > > > >>>>> }
> > > > > > > >>>>>
> > > > > > > >>>>> if (! empty($GLOBALS['server'])
> > > > > > > >>>>> && $GLOBALS['server'] != $GLOBALS['cfg']['ServerDefault']) {
> > > > > > > >>>>> $params['server'] = $GLOBALS['server'];
> > > > > > > >>>>> }
> > > > > > > >>>>> if (empty($_COOKIE['pma_lang'])
> > > > > > > >>>>> && ! empty($GLOBALS['lang'])) {
> > > > > > > >>>>> $params['lang'] = $GLOBALS['lang'];
> > > > > > > >>>>> }
> > > > > > > >>>>> if (empty($_COOKIE['pma_charset'])
> > > > > > > >>>>> && ! empty($GLOBALS['convcharset'])) {
> > > > > > > >>>>> $params['convcharset'] = $GLOBALS['convcharset'];
> > > > > > > >>>>> }
> > > > > > > >>>>> if (empty($_COOKIE['pma_collation_connection'])
> > > > > > > >>>>> && ! empty($GLOBALS['collation_connection'])) {
> > > > > > > >>>>> $params['collation_connection'] = $GLOBALS['collation_connection'];
> > > > > > > >>>>> }
> > > > > > > >>>>>
> > > > > > > >>>>> $params['token'] = $_SESSION[' PMA_token '];
> > > > > > > >>>>>
> > > > > > > >>>>> if (! is_array($skip)) {
> > > > > > > >>>>> if (isset($params[$skip])) {
> > > > > > > >>>>> unset($params[$skip]);
> > > > > > > >>>>> }
> > > > > > > >>>>> } else {
> > > > > > > >>>>> foreach ($skip as $skipping) {
> > > > > > > >>>>> if (isset($params[$skipping])) {
> > > > > > > >>>>> unset($params[$skipping]);
> > > > > > > >>>>> }
> > > > > > > >>>>> }
> > > > > > > >>>>> }
> > > > > > > >>>>>
> > > > > > > >>>>> $spaces = str_repeat(' ', $indent);
> > > > > > > >>>>>
> > > > > > > >>>>> $return = '';
> > > > > > > >>>>> foreach ($params as $key => $val) {
> > > > > > > >>>>> $return .= $spaces . '<input type="hidden" name="' . htmlspecialchars($key) . '" value="' . htmlspecialchars(\
> > > > > > > >>>>> $val) . '" />' . "\\n";
> > > > > > > >>>>> }
> > > > > > > >>>>>
> > > > > > > >>>>> return $return;
> > > > > > > >>>>> }
> > > > > > > >>>>>
> > > > > > > >>>>> /**
> > > > > > > >>>>> * Generates text with URL parameters.
> > > > > > > >>>>> *
> > > > > > > >>>>> * <code>
> > > > > > > >>>>> * // note the ?
> > > > > > > >>>>> * echo 'script.php?' . PMA_generate_common_url('mysql', 'rights');
> > > > > > > >>>>> * // produces with cookies enabled:
> > > > > > > >>>>> * // script.php?db=mysql&table=rights
> > > > > > > >>>>> * // with cookies disabled:
> > > > > > > >>>>> * // script.php?server=1&lang=en-utf-8&db=mysql&table=rights
> > > > > > > >>>>> *
> > > > > > > >>>>> * $params['myparam'] = 'myvalue';
> > > > > > > >>>>> * $params['db'] = 'mysql';
> > > > > > > >>>>> * $params['table'] = 'rights';
> > > > > > > >>>>> * // note the missing ?
> > > > > > > >>>>> * echo 'script.php' . PMA_generate_common_url($params);
> > > > > > > >>>>> * // produces with cookies enabled:
> > > > > > > >>>>> * // script.php?myparam=myvalue&db=mysql&table=rights
> > > > > > > >>>>> * // with cookies disabled:
> > > > > > > >>>>> * // script.php?server=1&lang=en-utf-8&myparam=myvalue&db=mysql&table=rights
> > > > > > > >>>>> *
> > > > > > > >>>>> * // note the missing ?
> > > > > > > >>>>> * echo 'script.php' . PMA_generate_common_url();
> > > > > > > >>>>> * // produces with cookies enabled:
> > > > > > > >>>>> * // script.php
> > > > > > > >>>>> * // with cookies disabled:
> > > > > > > >>>>> * // script.php?server=1&lang=en-utf-8
> > > > > > > >>>>> * </code>
> > > > > > > >>>>> *
> > > > > > > >>>>> * @param mixed assoc. array with url params or optional string with database name
> > > > > > > >>>>> * if first param is an array there is also an ? prefixed to the url
> > > > > > > >>>>> * @param string optional table name only if first param is array
> > > > > > > >>>>> * @param string character to use instead of '&' for deviding
> > > > > > > >>>>> * multiple URL parameters from each other
> > > > > > > >>>>> *
> > > > > > > >>>>> * @return string string with URL parameters
> > > > > > > >>>>> *
> > > > > > > >>>>> * @global string the current language
> > > > > > > >>>>> * @global string the current conversion charset
> > > > > > > >>>>> * @global string the current connection collation
> > > > > > > >>>>> * @global string the current server
> > > > > > > >>>>> * @global arra"
> > > > > > > >>>>> 1372 httpd RET read 6467/0x1943
> > > > > > > >>>>> 1372 httpd CALL read(0x4,0x82e3028,0x2000)
> > > > > > > >>>>> 1372 httpd GIO fd 4 read 0 bytes
> > > > > > > >>>>> ""
> > > > > > > >>>>> 1372 httpd RET read 0
> > > > > > > >>>>> 1372 httpd CALL read(0x4,0x82e3028,0x2000)
> > > > > > > >>>>> 1372 httpd GIO fd 4 read 0 bytes
> > > > > > > >>>>> ""
> > > > > > > >>>>> 1372 httpd RET read 0
> > > > > > > >>>>> 1372 httpd CALL close(0x4)
> > > > > > > >>>>> 1372 httpd RET close 0
> > > > > > > >>>>> 1372 httpd PSIG SIGSEGV SIG_DFL
> > > > > > > >>>>>
> > > > > > > >>>>>
> > > > > > > >>>>> I moved url_generating.lib.php to url_generating.lib.php.sav and
> > > > > > > >>>>> copied url_generating.lib.php.sav to a new url_generating.lib.php.
> > > > > > > >>>>> Same thing happens.
> > > > > > > >>>>>
> > > > > > > >>>>> I tried the latest phpMyAdmin-2.9.2 and it does the exact same thing.
> > > > > > > >>>>>
> > > > > > > >>>>> It always seg faults in the exact same place in the exact same way.
> > > > > > > >>>>>
> > > > > > > >>>>> /var/log/messages file gets:
> > > > > > > >>>>> Feb 3 16:07:38 testbox kernel: pid 8512 (httpd), uid 80: exited on signal 11
> > > > > > > >>>> Hmmm... a SEGV in apache or one of it's loaded modules should result
> > > > > > > >>>> in a core file in the cwd of the apache process. The general way to
> > > > > > > >>>> switch that behaviour off is by using the limits(1) command to set
> > > > > > > >>>> coredumpsize=0 -- and you can use /etc/login.conf to set limits for
> > > > > > > >>>> a whole class of users. If the apache startup scripts
> > > > > > > >>>> are running eg:
> > > > > > > >>>>
> > > > > > > >>>> eval `limits -e -C daemon`
> > > > > > > >>>>
> > > > > > > >>>> or similar that might be the cause. However, the default settings
> > > > > > > >>>> are 'coredumpsize=unlimited' for all, and I guess you'ld know if you'ld
> > > > > > > >>>> changed any of that sort of thing.
> > > > > > > >>>>
> > > > > > > >>>> Hmmm... cwd for the Apache process is set to the root directory, like
> > > > > > > >>>> all good daemons should. You can see that by:
> > > > > > > >>>>
> > > > > > > >>>> fstat -p `cat /var/run/httpd.pid`
> > > > > > > >>>>
> > > > > > > >>>> For very obvious security reasons, the root directory should not
> > > > > > > >>>> be writable by daemon processes with network listeners (and conversely,
> > > > > > > >>>> daemons should never be run as root or any other UID with write access,
> > > > > > > >>>> well, anywhere much). In this case, however, and strictly for testing
> > > > > > > >>>> purposes, so long as it's on a machine not accessible from the Internet,
> > > > > > > >>>> temporarily making the root dir writable by the apache process could help
> > > > > > > >>>> get you a core file to analyse.
> > > > > > > >>> I changed / to mode 777 and reran the test. Same seg fault and still no core file.
> > > > > > > >>> When I say there is no core file I have checked with find / -name "*.core"
> > > > > > > >>> and there are no core files anywhere on the system.
> > > > > > > >>>
> > > > > > > >>>
> > > > > > > >>>>> /var/log/httpd-errors gets:
> > > > > > > >>>>> [Sat Feb 3 16:07:39 2007] [notice] child pid 8512 exit signal Segmentation fault (11)
> > > > > > > >>>>>
> > > > > > > >>>>> I am out of ideas on what to try next. Anyone else have any suggestions?
> > > > > > > >>>> Can you try unmounting and fsck'ing the partition (fsck -f /dev/adXsYz)
> > > > > > > >>>> where url_generating.lib.php lives?
> > > > > > > >>> I thought by creating a new url_generating.lib.php file that would test the problem
> > > > > > > >>> of there being a bad spot on the disk. fsck runs clean.
> > > > > > > >>>
> > > > > > > >>>> Given that the error you are seeing is so repeatable, it is unlikely
> > > > > > > >>>> to be a hardware fault, but it may be worth running a cycle or two
> > > > > > > >>>> of memtest86 to see if it picks up anything.
> > > > > > > >>>>
> > > > > > > >>>> Otherwise the only thing I can think to try is the rather blunt approach
> > > > > > > >>>> of recompiling/reinstalling the phpMyAdmin port and everything it depends
> > > > > > > >>>> on:
> > > > > > > >>>>
> > > > > > > >>>> portupgrade -Rfi phpMyAdmin
> > > > > > > >>>
> > > > > > > >>> I ran portupgrade -Rfv phpMyAdmin. It has a lot of dependencies
> > > > > > > >>> so it took a long time to finish and I didn't want to sit in front
> > > > > > > >>> of it and answer yes to all the questions.
> > > > > > > >>>
> > > > > > > >>>
> > > > > > > >>> It still does the exact same thing.
> > > > > > > >>>
> > > > > > > >>> I'm stumped. I guess I'll try a new install on a different system.
> > > > > > > >>>
> > > > > > > >>> Thanks,
> > > > > > > >>> Terry Todd
> > > > > > > >> It's a memory access issue most likely (signal 11), so making sure that
> > > > > > > >> all of its dependencies are current would be the first order of
> > > > > > > >> business. Don't forget to restart the http daemon that's using php so it
> > > > > > > >> can reload the libraries / dependencies.
> > > > > > > >>
> > > > > > > >> Next I'd check for memory errors on your machine; memtest86+ can solve that.
> > > > > > > >>
> > > > > > > >> Finally, (if possible) I'd see if you could trace down the exact line of
> > > > > > > >> code where it segfaulted (if it's a consistent location where it fails)
> > > > > > > >> in the phpMyAdmin program and then send it upstream to the maintainer
> > > > > > > >> via a bug report.
> > > > > > >
> > > > > > > I am the maintainer for the phpMyAdmin port. Consider me already informed.
> > > > > > >
> > > > > > > > I took the hard drive out of the computer that was having the
> > > > > > > > problem and installed in a completely different computer.
> > > > > > > >
> > > > > > > > It still has the same exact problem in the same exact place.
> > > > > > > >
> > > > > > > > The only reference to url_generating.lib.php is on line 2682 of
> > > > > > > > phpMyAdmin/libraries/common.lib.php
> > > > > > > >
> > > > > > > > httpd is what actually segfaults when reading the file url_generating.lib.php.
> > > > > > >
> > > > > > > Given that I've seen no other reports of anything like this, either
> > > > > > > direct to me or to phpMyAdmin lists on sourceforge, and that I've
> > > > > > > got a number of phpMyAdmin installations happily working for various
> > > > > > > customers using various different Apache and PHP versions, I'm pretty
> > > > > > > certain that the root cause of your problem is something localised on
> > > > > > > your system.
> > > > > > >
> > > > > > > I think you've pretty well eliminated hardware faults (either memory
> > > > > > > or disk) as the cause. Therefore the prime suspect must be something
> > > > > > > within your local install. Two possibilities come to mind: (a) does
> > > > > > > your php installation contain all of the required functionality? (b)
> > > > > > > have you managed to place some sort of pathological statement in
> > > > > > > php.ini or config.inc.php Arguably though, anything like that which
> > > > > > > could cause segmentation violations in apache / PHP / phpMyAdmin is
> > > > > > > a bug in one or other of those packages.
> > > > > > >
> > > > > > > On option (a) the phpMyAdmin port depends on a number of PHP modules
> > > > > > > -- you need to have mysql, pcre and session but can optionally have
> > > > > > > the following:
> > > > > > >
> > > > > > > happy-idiot-talk:~:% pkg_info -r phpMyAdmin\* | grep php5
> > > > > > > Dependency: php5-5.2.0
> > > > > > > Dependency: php5-zlib-5.2.0
> > > > > > > Dependency: php5-session-5.2.0
> > > > > > > Dependency: php5-pcre-5.2.0
> > > > > > > Dependency: php5-openssl-5.2.0
> > > > > > > Dependency: php5-mysqli-5.2.0
> > > > > > > Dependency: php5-mysql-5.2.0
> > > > > > > Dependency: php5-mcrypt-5.2.0
> > > > > > > Dependency: php5-mbstring-5.2.0
> > > > > > > Dependency: php5-gd-5.2.0
> > > > > > > Dependency: php5-bz2-5.2.0
> > > > > > >
> > > > > > > On (b) I suggest comparing your php.ini and config.inc.php with the
> > > > > > > default ones installed with the respective ports and hashing out
> > > > > > > anything you've modified to see if you can identify what (if anything)
> > > > > > > in those files might be causing the problem.
> > > > > > >
> > > > > > > Quite frankly though, I'm doing no more than guessing at what the cause
> > > > > > > of the trouble is and I can't guarantee either of the above is going to
> > > > > > > get you results. There is undoubtedly some small, overlooked but vital
> > > > > > > thing which is the key to all this...
> > > > > > >
> > > > > > > Cheers,
> > > > > > >
> > > > > > > Matthew
> > > > > > >
> > > > > > > --
> > > > > > > Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard
> > > > > > > Flat 3
> > > > > > > PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate
> > > > > > > Kent, CT11 9PW
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > on a)
> > > > > > testbox# pkg_info -r phpMyAdmin\* | grep php5
> > > > > > Dependency: php5-5.1.6_3
> > > > > > Dependency: php5-zlib-5.1.6_3
> > > > > > Dependency: php5-session-5.1.6_3
> > > > > > Dependency: php5-pcre-5.1.6_3
> > > > > > Dependency: php5-openssl-5.1.6_3
> > > > > > Dependency: php5-mysqli-5.1.6_3
> > > > > > Dependency: php5-mysql-5.1.6_3
> > > > > > Dependency: php5-mcrypt-5.1.6_3
> > > > > > Dependency: php5-mbstring-5.1.6_3
> > > > > > Dependency: php5-bz2-5.1.6_3
> > > > > > Dependency: php5-gd-5.1.6_3
> > > > > > testbox#
> > > > > >
> > > > > > on b)
> > > > > > testbox# diff php.ini php.ini-dist
> > > > > > testbox#
> > > > > >
> > > > > > testbox# diff config.inc.php config.inc.php.sample
> > > > > > 13,14d12
> > > > > > < $cfg['Servers'][$i]['user'] = 'root';
> > > > > > < $cfg['Servers'][$i]['password'] = '********'; [actual password blotted out]
> > > > > > testbox#
> > > > > >
> > > > > > Other programs like phpSysInfo work OK.
> > > > > >
> > > > > > portupgrade -Rfv phpMyAdmin made no difference.
> > > > > >
> > > > > > I also ran make buildworld and make installworld which also made
> > > > > > no difference.
> > > > > >
> > > > > > The latest complete ktrace.out is attached to the email I sent to your personal email.
> > > > > >
> > > > > > Terry Todd
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > freebsd-questions at freebsd.org mailing list
> > > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > > > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> > > > > _______________________________________________
> > > > > freebsd-questions at freebsd.org mailing list
> > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> > > > >
> > > > _______________________________________________
> > > > freebsd-questions at freebsd.org mailing list
> > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> > >
> >
>
More information about the freebsd-questions
mailing list