Johan.Johansen at cc.uit.no
Mon Oct 16 04:59:18 PDT 2006
I still have the same problem as below, even when running 6.2-BETA2 from
a FreeSBIE - cd. I wonder if this could have to do with badly supportet
motherboard, ASUS P5B, since I dont see any temp-readings with sysctl.
cpuTemp and MBTemp are displayed under bios-config.
Another "funny" thing, if I read disk-data with smartmontools,
smartctl -a /dev/ad10
[irq19: re0 uhci3++] starts using a hole cpu for itself, and only
a reboot helps.
> I run 6.1-STABLE-200607 on my brand new box with
> Intel Core 2 Duo E6600 2 x 2,40 GHz cpu (beautiful piece of machinery)
> I can use my dvd-devices with atapicd, but atapicam do not work.
> kldload atapicam causes an interrupt storm, I guess.
> I tried to take out atapicd from the kernel after reading
> In fact, I removed ataraid atapifd atapist too, without any luck.
> Here is output from top -S a few seconds after kldload atapicam
> last pid: 600; load averages: 0.24, 0.24, 0.11 up
> 0+00:02:36 11:27:53
> 88 processes: 5 running, 64 sleeping, 19 waiting
> CPU states: 0.0% user, 0.0% nice, 0.0% system, 43.8% interrupt, 56.2% idle
> Mem: 22M Active, 9604K Inact, 28M Wired, 15M Buf, 1943M Free
> Swap: 4070M Total, 4070M Free
> PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
> 11 root 1 171 52 0K 8K RUN 1 2:03 99.26% idle: cpu1
> 12 root 1 171 52 0K 8K RUN 0 1:54 62.26% idle: cpu0
> 22 root 1 -64 -183 0K 8K CPU0 0 0:09 36.41% irq16: uhci0+
> 31 root 1 -68 -187 0K 8K WAIT 1 0:01 0.00% irq19: re0
> Could anyone point me in a direction too solve this, please?
More information about the freebsd-questions