hp 1020 printer not working

[Sergio Lenzi]

Hello... has anyone been able to make an HP1020 printer
work in FreeBSD 6.1-RELEASE????

it finds the printer, attaches it, but when I try to boot the rom code
(shihp1020.img)
it blocks ... for the trace below you can see that it does not open the
printer,
usb status is 0x00  and error is 15....

Have any solution to this????


Thanks in advance

Sergio
=========================================

Nov  9 19:35:07  kernel: ulpt0: detached
Nov  9 19:35:21  kernel: ulpt_match
Nov  9 19:35:21  last message repeated 2 times
Nov  9 19:35:21  kernel: ulpt_attach: sc=0xc49e9080
Nov  9 19:35:21  kernel: ulpt0: Hewlett-Packard HP LaserJet 1020, rev
2.00/1.00, addr 2, iclass 7/1
Nov  9 19:35:21  kernel: ulpt0: using bi-directional mode
Nov  9 19:35:21  kernel: ulpt0: debug 1
Nov  9 19:35:21  kernel: ulpt_attach: bulk=1
Nov  9 19:35:27  kernel: ulptopen: flags=0x40
Nov  9 19:35:32  kernel: ulpt_status: status=0x00 err=15
Nov  9 19:35:32  kernel: ulpt_open: waiting a while
Nov  9 19:35:38  kernel: ulpt_status: status=0xe0 err=15
Nov  9 19:35:38  kernel: ulpt_open: waiting a while
Nov  9 19:35:43  kernel: ulpt_status: status=0xe0 err=15
Nov  9 19:35:43  kernel: ulpt_open: waiting a while
Nov  9 19:35:48  kernel: ulpt_status: status=0xe0 err=15
Nov  9 19:35:48  kernel: ulpt_open: waiting a while
Nov  9 19:35:53  kernel: ulpt_status: status=0xe0 err=15
Nov  9 19:35:53  kernel: ulpt_open: waiting a while
Nov  9 19:35:55  kernel: ulpt0: at uhub2 port 3 (addr 2) disconnected
Nov  9 19:35:55  kernel: ulpt_detach: sc=0xc49e9080
Nov  9 19:35:59  kernel: ulpt_status: status=0xe0 err=15
Nov  9 19:35:59  kernel: ulpt_open: waiting a while
Nov  9 19:35:59  kernel: ulptopen: done, error=6
Nov  9 19:36:09  kernel: ulpt0: detached