Kernel Panic on FreeBSD 6.1 with Dell PE1850 / 1750
Jorn Argelo
jorn at wcborstel.com
Sat May 27 12:21:35 PDT 2006
Mike wrote:
> Hello,
>
> I got a handful of Dell PE1850 and PE1750 boxes running mail
> scanning that we recently upgraded to FreeBSD 6.1.
>
> It started with a new PE1850 (mx4) that we immediately installed 6.1
> on, which started having kernel panics- we initially blamed it
> on hardware. But last week, we rebuild a PE1750 (mx6) we've been
> running for over a year with FBSD 4.11 without any problems,
> and it's crashing now as well.
>
> Are there any known issues with FreeBSD 6.1 on any of the Dell
> PE series machines?
>
> Any thoughts would be great,
>
> Mike
>
>
> Some details:
>
> PE1850
> --snip--
>
> FreeBSD mx4 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Mon May 15 18:55:30 PDT 2006
> mike at build.office:/usr/obj/usr/src/sys/U_GENERIC_SMP i386
>
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 00
> fault virtual address = 0x5c
> fault code = supervisor read, page not present
> instruction pointer = 0x20:0xc072dbda
> stack pointer = 0x28:0xea9b9a98
> frame pointer = 0x28:0xea9b9b28
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 20764 (exim-4.60-1)
> trap number = 12
> panic: page fault
> cpuid = 0
> Uptime: 10d13h1m4s
> Dumping 3071 MB (2 chunks)
> chunk 0: 1MB (159 pages) ... ok
> chunk 1: 3071MB (786112 pages) 3055 3039 3823 3007 2991
>
> --snip--
>
>
> PE1750
> --snip--
>
> FreeBSD mx6 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Mon May 15 18:55:30 PDT 2006
> mike at build.office:/usr/obj/usr/src/sys/U_GENERIC_SMP i386
>
> Fatal trap 12: page fault while in kernel mode
> cpuid = 2; apic id = 06
> fault virtual address = 0x5c
> fault code = supervisor read, page not present
> instruction pointer = 0x20:0xc072dbda
> stack pointer = 0x28:0xf2791a98
> frame pointer = 0x28:0xf2791b28
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 60007 (exim-4.60-1)
> trap number = 12
> panic: page fault
> cpuid = 2
> Uptime: 2d16h44m0s
> Dumping 3071 MB (2 chunks)
> chunk 0: 1MB (159 pages) ... ok
> chunk 1: 3071MB (786135 pages) 3055 3039
>
> --snip--
>
>
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
I am running 6.1-STABLE on a Dell PE 1850 very smoothly actually. The
machine is rock-solid and a constant load of 5-10. Can you give me a
dmesg output? Maybe the hardware isn't identical to the setup we have,
or maybe something isn't right in your kernel config.
Jorn
Jorn
More information about the freebsd-questions
mailing list