6.1-BETA2 AMD64 boot only CD freezes at "module_register_init:
MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6
Joseph Turian
turian at gmail.com
Sat Mar 4 15:53:34 PST 2006
Sorry about the double posting. I have since been disabused of the
notion that freebsd-questions at freebsd.org and questions at freebsd.org
are separate lists.
Joseph
On 3/3/06, Joseph Turian <turian at gmail.com> wrote:
> I flubbed that error message slightly, since I have to copy it by hand. :P
> Sorry about that, here's the correct version:
>
>
> Here is the 6.1-BETA2 AMD64 boot freeze message:
>
> Timecounter "TSC" frequency 2009156527 Hz quality 800
> Timecounters tick every 1.000 msec
> module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6
>
>
>
> Here is the 6.0 AMD64 boot freeze message:
>
> Timecounter "TSC" frequency 2009156417 Hz quality 800
> Timecounters tick every 1.000 msec
>
> Joseph
>
>
> >
> > This is slightly modified version of the error I get if I try to 6.0 boot disc.
> >
> > Here is some prior evidence I collected in an earlier version of this
> > question on list.freebsd.questions. No one seems to know the answer,
> > so I'm following up here with more information, in the hopes someone
> > can help me out. (Sorry if anyone minds.) I need to install this
> > system RSN and I'd prefer to use FreeBSD but the Linux install works
> > fine in a pinch and FreeBSD won't even boot. Please help!
> >
> > Thanks,
> >
> > Joseph
> >
> > =====
> >
> > From: "Joseph Turian" <tur... at gmail.com>
> > Newsgroups: list.freebsd.questions
> > Subject: 6.0 install CD boot freezes at "Timecounters tick every 1.000 msec"
> > Date: 2 Mar 2006 14:08:30 -0800
> >
> > I'm having difficulty booting FreeBSD from the 6.0 install disc 1 for
> > AMD64.
> > I've also tried the boot disk, with the same problem.
> >
> > Basically, I'm trying to install on a clean system. Boot with ACPI
> > *disabled* freezes with:
> >
> > Timecounter "TSC" frequency 2009156417 Hz quality 800
> > Timecounters tick every 1.000 msec
> >
> >
> > I've googled this message and the recommendation is "boot with ACPI".
> > But I disabled ACPI in the BIOS *and* I boot with option 2 (no ACPI),
> > so that doesn't resolve the issue.
> >
> > Please help! I'd really like to install FreeBSD and give it a spin. I'd
> > hate to be forced to install Linux just because it works no problem.
> >
> > Thanks,
> > Joseph
> >
> > P.S. If you're interested in my hardware, here's the dmesg output from
> > the gentoo livecd i686 2006.0 installer cd. I have a SATA disk and an
> > IDE disk, maybe that's the issue?
> >
> > Linux version 2.6.15-gentoo-r5 (root at gravity) (gcc version 3.4.4
> > (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Mon Feb 13 20:23:47
> > UTC 2006
> > BIOS-provided physical RAM map:
> > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
> > BIOS-e820: 0000000000100000 - 000000007bfc0000 (usable)
> > BIOS-e820: 000000007bfc0000 - 000000007bfce000 (ACPI data)
> > BIOS-e820: 000000007bfce000 - 000000007bff0000 (ACPI NVS)
> > BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved)
> > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> > BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> > 1087MB HIGHMEM available.
> > 896MB LOWMEM available.
> > found SMP MP-table at 000ff780
> > On node 0 totalpages: 507840
> > DMA zone: 4096 pages, LIFO batch:0
> > DMA32 zone: 0 pages, LIFO batch:0
> > Normal zone: 225280 pages, LIFO batch:31
> > HighMem zone: 278464 pages, LIFO batch:31
> > DMI 2.3 present.
> > ACPI: RSDP (v000 ACPIAM ) @ 0x000fb870
> > ACPI: RSDT (v001 A M I OEMRSDT 0x10000505 MSFT 0x00000097) @
> > 0x7bfc0000
> > ACPI: FADT (v002 A M I OEMFACP 0x10000505 MSFT 0x00000097) @
> > 0x7bfc0200
> > ACPI: MCFG (v001 A M I OEMMCFG 0x10000505 MSFT 0x00000097) @
> > 0x7bfc0400
> > ACPI: OEMB (v001 A M I AMI_OEM 0x10000505 MSFT 0x00000097) @
> > 0x7bfce040
> > ACPI: DSDT (v001 A0368 A0368001 0x00000001 INTL 0x02002026) @
> > 0x00000000
> > Intel MultiProcessor Specification v1.4
> > Virtual Wire compatibility mode.
> > OEM ID: TEMPLATE Product ID: CSM APIC at: 0xFEE00000
> > Processor #0 15:15 APIC version 16
> > I/O APIC #1 Version 17 at 0xFEC00000.
> > Enabling APIC mode: Flat. Using 1 I/O APICs
> > Processors: 1
> > Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000)
> > Built 1 zonelists
> > Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap
> > looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791
> > splash=silent,theme:livecd-2006.0 CONSOLE=/dev/tty1 quiet
> > BOOT_IMAGE=gentoo
> > mapped APIC to ffffd000 (fee00000)
> > mapped IOAPIC to ffffc000 (fec00000)
> > Initializing CPU#0
> > CPU 0 irqstacks, hard=c0427000 soft=c041f000
> > PID hash table entries: 4096 (order: 12, 65536 bytes)
> > Detected 2009.214 MHz processor.
> > Using tsc for high-res timesource
> > Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized
> > Console: colour dummy device 80x25
> > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> > Memory: 2005764k/2031360k available (2388k kernel code, 24456k
> > reserved, 561k data, 220k init, 1113856k highmem)
> > Checking if this processor honours the WP bit even in supervisor
> > mode... Ok.
> > Calibrating delay using timer specific routine.. 4023.16 BogoMIPS
> > (lpj=20115849)
> > Mount-cache hash table entries: 512
> > CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000
> > 00000001 00000000 00000001
> > CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000
> > 00000001 00000000 00000001
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 512K (64 bytes/line)
> > CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010
> > 00000001 00000000 00000001
> > mtrr: v2.0 (20020519)
> > Enabling fast FPU save and restore... done.
> > Enabling unmasked SIMD FPU exception support... done.
> > Checking 'hlt' instruction... OK.
> > ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI
> > Name: 43035350
> > ACPI-0292: *** Error: Looking up [0x43035350] (NON-ASCII)
> > in namespace, AE_BAD_CHARACTER
> > ACPI-0115: *** Error: acpi_load_tables: Could not load namespace:
> > AE_BAD_CHARACTER
> > ACPI-0123: *** Error: acpi_load_tables: Could not load tables:
> > AE_BAD_CHARACTER
> > ACPI: Unable to load the System Description Tables
> > CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
> > Total of 1 processors activated (4023.16 BogoMIPS).
> > ExtINT not setup in hardware but reported by MP table
> > ENABLING IO-APIC IRQs
> > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
> > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > ...trying to set up timer (IRQ0) through the 8259A ...
> > ..... (found pin 0) ...works.
> > Brought up 1 CPUs
> > checking if image is initramfs... it is
> > Freeing initrd memory: 3941k freed
> > NET: Registered protocol family 16
> > EISA bus registered
> > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
> > PCI: Using MMCONFIG
> > ACPI: Subsystem revision 20050902
> > ACPI: Interpreter disabled.
> > Linux Plug and Play Support v0.97 (c) Adam Belay
> > pnp: PnP ACPI: disabled
> > SCSI subsystem initialized
> > PCI: Probing PCI hardware
> > PCI: Probing PCI hardware (bus 00)
> > Boot video device is 0000:00:05.0
> > PCI: Transparent bridge - 0000:00:10.0
> > PCI: Using IRQ router default [10de/0260] at 0000:00:0a.0
> > PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 11
> > PCI->APIC IRQ transform: 0000:00:0a.1[A] -> IRQ 5
> > PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 5
> > PCI->APIC IRQ transform: 0000:00:0b.1[B] -> IRQ 3
> > PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 5
> > PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 5
> > PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 5
> > PCI->APIC IRQ transform: 0000:00:14.0[A] -> IRQ 5
> > PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 5
> > PCI: Bridge: 0000:00:02.0
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:03.0
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:04.0
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:10.0
> > IO window: c000-cfff
> > MEM window: faa00000-faafffff
> > PREFETCH window: disabled.
> > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > PCI: Setting latency timer of device 0000:00:03.0 to 64
> > PCI: Setting latency timer of device 0000:00:04.0 to 64
> > PCI: Setting latency timer of device 0000:00:10.0 to 64
> > audit: initializing netlink socket (disabled)
> > audit(1141365136.290:1): initialized
> > highmem bounce pool size: 64 pages
> > Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
> > SGI XFS with ACLs, security attributes, realtime, large block numbers,
> > no debug enabled
> > SGI XFS Quota Management subsystem
> > Initializing Cryptographic API
> > io scheduler noop registered
> > io scheduler anticipatory registered
> > io scheduler deadline registered
> > io scheduler cfq registered
> > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
> > assign_interrupt_mode Found MSI capability
> > Allocate Port Service[pcie00]
> > Allocate Port Service[pcie03]
> > PCI: Setting latency timer of device 0000:00:03.0 to 64
> > pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
> > assign_interrupt_mode Found MSI capability
> > Allocate Port Service[pcie00]
> > Allocate Port Service[pcie03]
> > PCI: Setting latency timer of device 0000:00:04.0 to 64
> > pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
> > assign_interrupt_mode Found MSI capability
> > Allocate Port Service[pcie00]
> > Allocate Port Service[pcie03]
> > initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
> > vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k,
> > total 65536k
> > vesafb: mode is 1024x768x16, linelength=2048, pages=1
> > vesafb: protected mode interface info at c000:d0c0
> > vesafb: scrolling: redraw
> > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> > vesafb: Mode is VGA compatible
> > Console: switching to colour frame buffer device 128x48
> > fb0: VESA VGA frame buffer device
> > isapnp: Scanning for PnP cards...
> > isapnp: No Plug & Play device found
> > PNP: No PS/2 controller found. Probing ports directly.
> > serio: i8042 AUX port at 0x60,0x64 irq 12
> > serio: i8042 KBD port at 0x60,0x64 irq 1
> > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
> > enabled
> > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > mice: PS/2 mouse device common for all mice
> > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> > loop: loaded (max 8 devices)
> > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx
> > NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
> > NFORCE-MCP51: chipset revision 161
> > NFORCE-MCP51: not 100% native mode: will probe irqs later
> > NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
> > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> > Probing IDE interface ide0...
> > input: AT Translated Set 2 keyboard as /class/input/input0
> > hda: WDC WD1600JB-00GVA0, ATA DISK drive
> > input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > Probing IDE interface ide1...
> > hdc: ASUS DRW-1608P2S, ATAPI CD/DVD-ROM drive
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: max request size: 1024KiB
> > hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63,
> > UDMA(100)
> > hda: cache flushes supported
> > hda: hda1
> > hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66)
> > Uniform CD-ROM driver Revision: 3.20
> > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > md: bitmap version 4.39
> > EISA: Probing bus 0 at eisa.0
> > EISA: Detected 0 cards.
> > NET: Registered protocol family 2
> > IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
> > TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
> > TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> > TCP: Hash tables configured (established 262144 bind 65536)
> > TCP reno registered
> > TCP bic registered
> > NET: Registered protocol family 1
> > NET: Registered protocol family 17
> > Using IPI Shortcut mode
> > Freeing unused kernel memory: 220k freed
> > usbcore: registered new driver usbfs
> > usbcore: registered new driver hub
> > PCI: Setting latency timer of device 0000:00:0b.1 to 64
> > ehci_hcd 0000:00:0b.1: EHCI Host Controller
> > ehci_hcd 0000:00:0b.1: debug port 1
> > PCI: cache line size of 64 is not supported by device 0000:00:0b.1
> > ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
> > ehci_hcd 0000:00:0b.1: irq 3, io mem 0xfebdfc00
> > ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 8 ports detected
> > usbcore: registered new driver hiddev
> > usbcore: registered new driver usbhid
> > drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> > Initializing USB Mass Storage driver...
> > usbcore: registered new driver usb-storage
> > USB Mass Storage support registered.
> > irq 3: nobody cared (try booting with the "irqpoll" option)
> > [<c0133a79>]
> > [<c0133b40>]
> > [<c0133561>]
> > [<c01046b3>]
> > =======================
> > [<c0103132>]
> > handlers:
> > [<f8850e4a>]
> > Disabling IRQ #3
> > USB Universal Host Controller Interface driver v2.3
> > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
> > (PCI)
> > PCI: Setting latency timer of device 0000:00:0b.0 to 64
> > ohci_hcd 0000:00:0b.0: OHCI Host Controller
> > ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
> > ohci_hcd 0000:00:0b.0: irq 5, io mem 0xfebde000
> > hub 2-0:1.0: USB hub found
> > hub 2-0:1.0: 8 ports detected
> > sl811: driver sl811-hcd, 19 May 2005
> > ieee1394: Initialized config rom entry `ip1394'
> > ohci1394: $Rev: 1313 $ Ben Collins <bcoll... at debian.org>
> > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]
> > MMIO=[faaff800-faafffff] Max Packet=[2048]
> > sbp2: $Rev: 1306 $ Ben Collins <bcoll... at debian.org>
> > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
> > ieee1394: sbp2: Try serialize_io=0 for better performance
> > libata version 1.20 loaded.
> > sata_nv 0000:00:0e.0: version 0.8
> > PCI: Setting latency timer of device 0000:00:0e.0 to 64
> > ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE000 irq 5
> > ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 5
> > ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023
> > 88:407f
> > ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
> > ata1: dev 0 configured for UDMA/133
> > scsi0 : sata_nv
> > ata2: no device found (phy stat 00000000)
> > scsi1 : sata_nv
> > Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0
> > Type: Direct-Access ANSI SCSI revision: 05
> > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
> > SCSI device sda: drive cache: write back
> > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
> > SCSI device sda: drive cache: write back
> > sda: unknown partition table
> > sd 0:0:0:0: Attached scsi disk sda
> > PCI: Setting latency timer of device 0000:00:0f.0 to 64
> > ata3: SATA max UDMA/133 cmd 0xDC00 ctl 0xD882 bmdma 0xD400 irq 5
> > ata4: SATA max UDMA/133 cmd 0xD800 ctl 0xD482 bmdma 0xD408 irq 5
> > ata3: no device found (phy stat 00000000)
> > scsi2 : sata_nv
> > ata4: no device found (phy stat 00000000)
> > scsi3 : sata_nv
> > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000067efab]
> > device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
> > dm-de... at redhat.com
> > ReiserFS: sda: warning: sh-2021: reiserfs_fill_super: can not find
> > reiserfs on sda
> > VFS: Can't find ext3 filesystem on dev sda.
> > VFS: Can't find an ext2 filesystem on dev sda.
> > SQUASHFS error: Can't find a SQUASHFS superblock on sda
> > FAT: bogus number of reserved sectors
> > VFS: Can't find a valid FAT filesystem on dev sda.
> > Unable to identify CD-ROM format.
> > UDF-fs: No partition found (1)
> > XFS: bad magic number
> > XFS: SB validate failed
> > ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find
> > reiserfs on hda
> > VFS: Can't find ext3 filesystem on dev hda.
> > VFS: Can't find an ext2 filesystem on dev hda.
> > SQUASHFS error: Can't find a SQUASHFS superblock on hda
> > FAT: invalid media value (0x01)
> > VFS: Can't find a valid FAT filesystem on dev hda.
> > Unable to identify CD-ROM format.
> > UDF-fs: No partition found (1)
> > XFS: bad magic number
> > XFS: SB validate failed
> > ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find
> > reiserfs on hda1
> > VFS: Can't find ext3 filesystem on dev hda1.
> > VFS: Can't find an ext2 filesystem on dev hda1.
> > SQUASHFS error: Can't find a SQUASHFS superblock on hda1
> > FAT: bogus number of reserved sectors
> > VFS: Can't find a valid FAT filesystem on dev hda1.
> > Unable to identify CD-ROM format.
> > UDF-fs: No partition found (1)
> > XFS: bad magic number
> > XFS: SB validate failed
> > ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find
> > reiserfs on hdc
> > VFS: Can't find ext3 filesystem on dev hdc.
> > VFS: Can't find an ext2 filesystem on dev hdc.
> > SQUASHFS error: Can't find a SQUASHFS superblock on hdc
> > FAT: bogus number of reserved sectors
> > VFS: Can't find a valid FAT filesystem on dev hdc.
> > ISO 9660 Extensions: Microsoft Joliet Level 3
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: DMA disabled
> > hdc: ide_intr: huh? expected NULL handler on exit
> > hdc: ATAPI reset complete
> > ISO 9660 Extensions: RRIP_1991A
> > VFS: busy inodes on changed media.
> > eth1394: $Rev: 1312 $ Ben Collins <bcoll... at debian.org>
> > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
> > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
> > parport0: irq 7 detected
> > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
> > PCI: Setting latency timer of device 0000:00:14.0 to 64
> > eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:14.0
> > eth1: no link during initialization.
> > eth1: no link during initialization.
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
> > hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
> > ide: failed opcode was: unknown
> > hdc: DMA disabled
> > hdc: ide_intr: huh? expected NULL handler on exit
> > hdc: ATAPI reset complete
> > eth1: link up.
> > VFS: busy inodes on changed media.
> > fbsplash: console 0 using theme 'default'
> > fbsplash: switched splash state to 'on' on console 0
> > NET: Registered protocol family 10
> > lo: Disabled Privacy Extensions
> > IPv6 over IPv4 tunneling driver
> > eth1: no IPv6 routers present
> >
>
>
> --
> http://www.cs.nyu.edu/~turian/
>
--
http://www.cs.nyu.edu/~turian/
More information about the freebsd-questions
mailing list