FBSD 6.0 and ppp
jhall at vandaliamo.net
jhall at vandaliamo.net
Sun Jun 11 19:41:48 UTC 2006
> Hello jhall!
>
> Sun, Jun 11, 2006 at 03:34:14AM -0000 you wrote:
>
>> > Hello jhall!
>> >
>> > Fri, Jun 09, 2006 at 06:07:26PM -0000 you wrote:
>> >
>> >> incoming:
>> >> set device /dev/cuad0
>> >> set ifaddr 10.0.0.1 10.0.0.0/24
>> > ^
>> > Experience shows that the slightly-braindead Windows client needs a
``trigger address'' to negotiate successfully. Here's what I use (my
>> net
>> > is 192.168.0.x and I insist on him to be 192.168.0.3, but first I
show 0.0.0.0):
>> >
>> > set ifaddr 192.168.0.1 192.168.0.3 255.255.255.255 0.0.0.0
>> > ^^^^^^^
>> >> /etc/ppp/ppp.secret
>> >> xxxx<TAB>password<TAB>10.0.0.95
>> > ^^^^^^^^^
>> > The man page doesn't say you really have to supply an address. Try
omitting it to see what happens...
>> >
>> >> When the connection is initially dialed, I see tun1 opened (tun0 is
a DSL
>> >> connection) and the PID displayed. However, the Windows system
hangs with
>> >> Verifying Password and will eventually report error 721.
>> >
>> > If all else fails, the output of ppp with `set log Phase Physical
>> Debug
>> > IPCP LCP' could be somewhat helpful in debugging.
>> >
>> >> Firewall rules are in place and allow all traffic from tun1.
>> >
>> > Doesn't matter, as the IP layer isn't started yet.
>> >
>> > HTH,
>> >
>> OK. If I implement the dial-in strategy on a system which does not
have any tun devices in use, it works fine. When I try to implement it
on a system which already has a tun device in use (e.g. for DSL), the
dial in connection fails.
>
> I run my dial-in on the device which happens to be tun1. I use mgetty
and use the following command in my configuration:
>
> /usr/sbin/ppp -unit 1 -direct
>
> I missed what you have in your /usr/local/bin/ppplogin, but I think it
should look similar.
>
> --
> DoubleF
>
OK. I added the -unit to ppplogin with no luck.
ppplogin now contains
#!/bin/sh
/usr/sbin/ppp -direct -untit1 incoming
When I dial in, I am not seeing the connection even logged in
/var/log/ppp.log. It looks like ppp is not opening the connection.
I copied the files to another FBSD server, which does not have an active
ppp connection and I am able to dial in fine. As soon as I bring up the
PPP connection for the DSL, I am not able to dial in.
Any ideas what I have missed? Should I be looking at multi-link ppp?
Thanks,
Jay
More information about the freebsd-questions
mailing list