ahd scsi adapter problem on 5.4-STABLE
Ludo Koren
lk at tempest.sk
Sun Jan 22 07:45:11 PST 2006
Hello all,
could somebody help me to identify problem on FreeBSD 5.4-STABLE? I am
not sure if it is SCSI adapter problem or disk problem.
Thank you very much.
Regards,
lk
# dmesg
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x1 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x76] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x0]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140 0x1
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0xa9 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x76] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x80]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x1 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0xaa Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x76] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x80]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x1 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0xa9 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x74] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x80]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x1 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0xa9 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x76] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x80]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x1 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0xaa Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x76] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x80]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x1 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0xaa Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x74] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x80]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x1 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
ahd0: Transmission error detected
LQISTAT1[0x10] LASTPHASE[0x1] SCSISIGI[0x60] PERRDIAG[0x4]
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0xaa Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x9] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x30]
SCSISIGI[0x76] SCSIPHASE[0x0] SCSIBUS[0x51] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x80]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0x6 CURRSCB 0x6 NEXTSCB 0x0
qinstart = 6 qinfifonext = 6
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
5 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x3f]
Total 1
Kernel Free SCB list: 6 12 1 2 3 4 7 8 9 10 11 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x829e, SCB 0x6
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
ahd0: FIFO1 Free, LONGJMP == 0x809e, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x4 0x8 0x0 0x5 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x24 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x6, SINDEX = 0x133, DINDEX = 0x114
ahd0: SCBPTR == 0xff06, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 6 1 0 0 0 0
STACK: 0x1 0x140 0x1b 0x140 0x1b 0x140 0x1b 0x140
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
LQIRetry for LQICRCI_LQ to release ACK
sa0 at ahd0 bus 0 target 10 lun 0
sa0: <HP C5683A C005> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
Copied 32 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0x18 0x0 0x0 0x0 0x0 0x29 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
da0 at ahd0 bus 0 target 3 lun 0
da0: <SEAGATE ST373207LW 0004> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da2 at ahd1 bus 0 target 1 lun 0
da2: <IBM IC35L018UWD210-0 S5BS> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da3 at ahd1 bus 0 target 8 lun 0
da3: <IBM IC35L073UWDY10-0 S23C> Fixed Direct Access SCSI-3 device
da3: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da3: 70007MB (143374805 512 byte sectors: 255H 63S/T 8924C)
da1 at ahd0 bus 0 target 9 lun 0
da1: <IBM IC35L073UWDY10-0 S25F> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 70007MB (143374805 512 byte sectors: 255H 63S/T 8924C)
GEOM_VINUM: plex request failed for gvinum/plex/usr.p1[READ(offset=4096, length=512)]
GEOM_VINUM: plex request failed for gvinum/plex/usr.p1[READ(offset=4096, length=512)]
GEOM_VINUM: plex request failed for gvinum/plex/usr.p1[READ(offset=0, length=512)]
GEOM_VINUM: plex request failed for gvinum/plex/usr.p1[READ(offset=512, length=512)]
GEOM_VINUM: plex request failed for gvinum/plex/usr.p1[READ(offset=0, length=512)]
Mounting root from ufs:/dev/gvinum/root
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
More information about the freebsd-questions
mailing list