How to use ulpt driver?
Vince
jhary at unsane.co.uk
Thu Dec 7 01:53:30 PST 2006
a at zeos.net wrote:
> I get USB printer Canon PIXMA iP 2000 and attached it to my computer.
>
> The kernel was compiled with:
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device usb # USB Bus (required)
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device umass # Disks/Mass storage - Requires scbus and da
>
> and sees the printer:
>
> ------------------------------------------------------------------------
> $ dmesg
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-RELEASE #14: Thu Dec 7 07:15:51 EET 2006
> root at host.my.domain:/usr/obj/usr/src/sys/MYKERNEL
> ACPI APIC Table: <MSISYS AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz (1511.68-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
> Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> real memory = 805240832 (767 MB)
> avail memory = 782880768 (746 MB)
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> acpi0: <MSISYS MSI ACPI> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x40f7 on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82845 host to AGP bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xde000000-0xde0000ff irq 17 at device 1.0 on pci2
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: Ethernet address: 00:02:44:92:18:75
> pci2: <mass storage, SCSI> at device 5.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 19 at device 31.2 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 23 at device 31.4 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pcm0: <Intel ICH2 (82801BA)> port 0xdc00-0xdcff,0xe000-0xe03f irq 17 at device 31.5 on pci0
> pcm0: <Analog Devices AD1885 AC97 Codec>
> acpi_tz0: <Thermal Zone> on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ugen0: Canon iP2000, rev 1.10/1.05, addr 2
> Timecounter "TSC" frequency 1511681224 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 38204MB <SAMSUNG SV4002H QP100-12> at ata0-master UDMA100
> acd0: CDROM <SAMSUNG CD-ROM SC-152L/C100> at ata1-master PIO4
> Trying to mount root from ufs:/dev/ad0s1a
> rl0: link state changed to UP
> ------------------------------------------------------------------------
>
> Now I loaded ulpt dinamically:
>
> ------------------------------------------------------------------------
> $ kldstat
> Id Refs Address Size Name
> 1 14 0xc0400000 33dc1c kernel
> 2 1 0xc073e000 58554 acpi.ko
> .................
> 12 1 0xc45f1000 3000 ulpt.ko
> ------------------------------------------------------------------------
>
> But no ulpt in /dev appeared:
>
> ------------------------------------------------------------------------
> $ ls /dev
> acd0 bpsm0 kbd0 random ttyv9
> acpi console klog sndstat ttyva
> ad0 consolectl kmem stderr ttyvb
> ad0s1 ctty log stdin ttyvc
> ad0s1a devctl mdctl stdout ttyvd
> ad0s1b devstat mem sysmouse ttyve
> ad0s1c dsp0.0 mixer0 ttyp0 ttyvf
> ad0s1d dsp0.1 net ttyv0 ugen0
> ad0s1e dspW0.0 net1 ttyv1 ugen0.1
> ad0s1f dspW0.1 net2 ttyv2 ugen0.2
> agpgart dspr0.1 net3 ttyv3 urandom
> apm fd network ttyv4 usb
> ata fd0 null ttyv5 usb0
> atkbd0 fido pci ttyv6 usb1
> audio0.0 geom.ctl psm0 ttyv7 xpt0
> audio0.1 io ptyp0 ttyv8 zero
> ------------------------------------------------------------------------
>
> What is wrong and how will I print?
>
when you plug in/turn on the printer with the system booted, what
appears in your dmesg/messages log?
I see there are some ugen entries in /dev so it might not be recognised
by the driver correctly.
Vince
> Elisej Babenko
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
More information about the freebsd-questions
mailing list