Two Dell PE1850s keep locking up...
Martin Hepworth
maxsec at gmail.com
Sun Aug 20 21:12:47 UTC 2006
Can you do anything else that hits the machine with high disk I/O?
If this an SMP enabled kernel? If so does the same thing occur if you use a
non-smp enabled kernel?
--
Martin
On 8/19/06, Jason Lixfeld <jason+lists.freebsd-questions at lixfeld.ca> wrote:
>
> (Please forgive the verbosity of this note)
>
> I have two identically configured Dell PowerEdge 1850 servers running
> FreeBSD 6.1-R-p3. Both of these machines seem to lock up under
> whatever load conditions are are present during compiling
> applications. The most recent lockup on one machine was while
> compiling a kernel, the other was while running portupgrade. Not
> sure what the straw is that breaks the back here, so I'm wondering if
> anyone has seen anything like this before and can perhaps shed some
> light on what might be happening, or perhaps give me some clues on
> how I can go about debugging/troubleshooting this.
>
> I've included a some output which will hopefully give a clear picture
> of how these guys are configured.
>
> While I appreciate everyone's input, please save yourself the trouble
> if your canned response would normally be something to the effect of
> telling me that Dell suck and I should use HP or IBM if I want to run
> FreeBSD.
>
> Thanks in advance!
>
> pciconf -lv:
>
> hostb0 at pci0:0:0: class=0x060000 card=0x016c1028
> chip=0x35908086 rev=0x09 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'E752x Server Memory Controller Hub'
> class = bridge
> subclass = HOST-PCI
> pcib1 at pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port A0'
> class = bridge
> subclass = PCI-PCI
> pcib4 at pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port B0'
> class = bridge
> subclass = PCI-PCI
> pcib5 at pci0:5:0: class=0x060400 card=0x00000050 chip=0x35988086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port B1'
> class = bridge
> subclass = PCI-PCI
> pcib8 at pci0:6:0: class=0x060400 card=0x00000050 chip=0x35998086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCI Express Port C0'
> class = bridge
> subclass = PCI-PCI
> uhci0 at pci0:29:0: class=0x0c0300 card=0x016c1028
> chip=0x24d28086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
> class = serial bus
> subclass = USB
> uhci1 at pci0:29:1: class=0x0c0300 card=0x016c1028
> chip=0x24d48086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
> class = serial bus
> subclass = USB
> uhci2 at pci0:29:2: class=0x0c0300 card=0x016c1028
> chip=0x24d78086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
> class = serial bus
> subclass = USB
> ehci0 at pci0:29:7: class=0x0c0320 card=0x016c1028
> chip=0x24dd8086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller'
> class = serial bus
> subclass = USB
> pcib9 at pci0:30:0: class=0x060400 card=0x00000000
> chip=0x244e8086 rev=0xc2 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6),
> 6300ESB Hub Interface to PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> isab0 at pci0:31:0: class=0x060100 card=0x00000000
> chip=0x24d08086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
> class = bridge
> subclass = PCI-ISA
> atapci0 at pci0:31:1: class=0x01018a card=0x016c1028
> chip=0x24db8086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
> class = mass storage
> subclass = ATA
> pcib2 at pci1:0:0: class=0x060400 card=0x00000044 chip=0x03308086
> rev=0x06 hdr=0x01
> vendor = 'Intel Corporation'
> device = '80332 [Dobson] I/O processor A-segment Bridge'
> class = bridge
> subclass = PCI-PCI
> pcib3 at pci1:0:2: class=0x060400 card=0x00000044 chip=0x03328086
> rev=0x06 hdr=0x01
> vendor = 'Intel Corporation'
> device = '80332 [Dobson] I/O processor B-segment Bridge'
> class = bridge
> subclass = PCI-PCI
> amr0 at pci2:14:0: class=0x010400 card=0x016c1028 chip=0x00131028
> rev=0x06 hdr=0x00
> vendor = 'Dell Computer Corporation'
> class = mass storage
> subclass = RAID
> pcib6 at pci5:0:0: class=0x060400 card=0x00000044 chip=0x03298086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = '6700PXH PCI Express-to-PCI Express Bridge A'
> class = bridge
> subclass = PCI-PCI
> pcib7 at pci5:0:2: class=0x060400 card=0x00000044 chip=0x032a8086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = '6700PXH PCI Express-to-PCI Express Bridge B'
> class = bridge
> subclass = PCI-PCI
> em0 at pci6:7:0: class=0x020000 card=0x016d1028 chip=0x10768086
> rev=0x05 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82547EI Gigabit Ethernet Controller'
> class = network
> subclass = ethernet
> em1 at pci7:8:0: class=0x020000 card=0x016d1028 chip=0x10768086
> rev=0x05 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82547EI Gigabit Ethernet Controller'
> class = network
> subclass = ethernet
> none0 at pci9:13:0: class=0x030000 card=0x016c1028
> chip=0x51591002 rev=0x00 hdr=0x00
> vendor = 'ATI Technologies Inc'
> device = 'RV100 Radeon 7000 / Radeon VE'
> class = display
> subclass = VGA
>
> dmesg:
>
> ricky# dmesg
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights
> reserved.
> FreeBSD 6.1-RELEASE-p3 #9: Wed Aug 9 10:07:40 EDT 2006
> root at RICKY.domain.tld:/usr/obj/usr/src/sys/RICKY
> ACPI APIC Table: <DELL PE BKC >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz K8-class CPU)
> Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
> ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,
> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> Logical CPUs per core: 2
> real memory = 1073479680 (1023 MB)
> avail memory = 1028681728 (981 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0: Changing APIC ID to 2
> ioapic1: Changing APIC ID to 3
> ioapic1: WARNING: intbase 32 != expected base 24
> ioapic2: Changing APIC ID to 4
> ioapic2: WARNING: intbase 64 != expected base 56
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 32-55 on motherboard
> ioapic2 <Version 2.0> irqs 64-87 on motherboard
> acpi0: <DELL PE BKC> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> amr0: <LSILogic MegaRAID 1.53> mem 0xf80f0000-0xf80fffff,
> 0xfe9e0000-0xfe9fffff irq 46 at device 14.0 on pci2
> amr0: Using 64-bit DMA
> amr0: delete logical drives supported by controller
> amr0: <LSILogic PERC 4e/Si> Firmware 521X, BIOS H430, 256MB RAM
> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib6
> em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
> 0xecc0-0xecff mem 0xfe6e0000-0xfe6fffff irq 64 at devi
> em0: Ethernet address: 00:13:72:53:4a:04
> pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
> pci7: <ACPI PCI bus> on pcib7
> em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
> 0xdcc0-0xdcff mem 0xfe4e0000-0xfe4fffff irq 65 at devi
> em1: Ethernet address: 00:13:72:53:4a:05
> pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci8: <ACPI PCI bus> on pcib8
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff
> irq 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf
> irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf
> irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
> 0xfeb00000-0xfeb003ff irq 23 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
> uhub4: multiple transaction translators
> uhub4: 2 ports with 2 removable, self powered
> pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci9: <ACPI PCI bus> on pcib9
> pci9: <display, VGA> at device 13.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> on acpi0
> sio0: type 16550A, console
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xec000-0xeffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> ucom0: Belkin USB PDA Adapter Belkin Components, rev 1.10/1.02, addr 2
> Timecounters tick every 1.000 msec
> acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33
> amr0: delete logical drives supported by controller
> amrd0: <LSILogic MegaRAID logical drive> on amr0
> amrd0: 139900MB (286515200 sectors) RAID 1 (optimal)
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/amrd0s2a
> WARNING: / was not properly dismounted
> WARNING: /tmp was not properly dismounted
> WARNING: /usr was not properly dismounted
> /usr: mount pending error: blocks 16 files 2
> WARNING: /var was not properly dismounted
> em0: link state changed to UP
> em1: link state changed to UP
>
> Raid Configuration:
>
> # megarc -ldInfo -a0 -Lall
>
>
>
> **********************************************************************
> MEGARC MegaRAID Configuration Utility(FreeBSD)-1.04
> (03-02-2005)
> By LSI Logic Corp.,USA
>
> **********************************************************************
> [Note: For SATA-2, 4 and 6 channel controllers, please
> specify
> Ch=0 Id=0..15 for specifying physical drive(Ch=channel,
> Id=Target)]
>
> Type ? as command line arg for help
>
>
> Finding Devices On Each MegaRAID Adapter...
> Scanning Ha 0, Chnl 0 Target 15
>
> *******Information Of Logical Drive 0*******
>
> Logical Drive : 0( Adapter: 0 ): Status: OPTIMAL
> ---------------------------------------------------
> SpanDepth :01 RaidLevel: 1 RdAhead : Adaptive Cache:
> DirectIo
> StripSz :064KB Stripes : 2 WrPolicy: WriteBack
>
> Logical Drive 0 : SpanLevel_0 Disks
> Chnl Target StartBlock Blocks Physical Target Status
> ---- ------ ---------- ------ ----------------------
> 0 00 0x00000000 0x1113e000 ONLINE
> 0 01 0x00000000 0x1113e000 ONLINE
>
> Kernel Config:
>
> machine amd64
> cpu HAMMER
> ident RICKY
> options SCHED_ULE # ULE scheduler
> options PREEMPTION # Enable kernel thread
> preemption
> options INET # InterNETworking
> options FFS # Berkeley Fast Filesystem
> options SOFTUPDATES # Enable FFS soft updates
> support
> options UFS_ACL # Support for access control
> lists
> options UFS_DIRHASH # Improve performance on big
> directories
> options CD9660 # ISO 9660 Filesystem
> options COMPAT_43 # Needed by COMPAT_LINUX32
> options COMPAT_IA32 # Compatible with i386 binaries
> options COMPAT_FREEBSD4 # Compatible with FreeBSD4
> options COMPAT_FREEBSD5 # Compatible with FreeBSD5
> options COMPAT_LINUX32 # Compatible with i386 linux
> binaries
> options SCSI_DELAY=5000 # Delay (in ms) before
> probing SCSI
> options SYSVSHM # SYSV-style shared memory
> options SYSVMSG # SYSV-style message queues
> options SYSVSEM # SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-
> time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options ADAPTIVE_GIANT # Giant mutex is adaptive.
> device acpi
> device pci
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> options ATA_STATIC_ID # Static device numbering
> device scbus # SCSI bus (required for SCSI)
> device amr # AMI MegaRAID
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
> device vga # VGA video card driver
> device splash # Splash screen and screen saver support
> device sc
> device sio # 8250, 16[45]50 based serial ports
> device em # Intel PRO/1000 adapter Gigabit
> Ethernet Card
> device loop # Network loopback
> device random # Entropy device
> device ether # Ethernet support
> device pty # Pseudo-ttys (telnet etc)
> device bpf # Berkeley packet filter
> device uhci # UHCI PCI->USB interface
> device ehci # EHCI PCI->USB interface (USB 2.0)
> device usb # USB Bus (required)
> device ucom
> device umct
> device ukbd # Keyboard
> device ums # Mouse
> options SMP # SMP
> device mem # lsof
> device io # lsof
> options IPI_PREEMPTION
> device mptable # Optional MPSPEC mptable
> support
> options DEVICE_POLLING
> options HZ=1000
> options ENABLE_ALART
> options ACCEPT_FILTER_HTTP # Apache accf_http module
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe at freebsd.org"
>
More information about the freebsd-questions
mailing list