Help with Xorg

Subhro subhro.kar at gmail.com
Sat Sep 24 16:39:57 PDT 2005


nawcom wrote:

> Is the nvidia module being loaded into the kernel? i am assuming so. 
> the devices should be created during bootup. let me know if 
> /dev/nvidia* is being created, or email a boot log.
>
> Thanks,
> Ben

Hello Ben,

Thanks for your reply. kldstat shows that nvidia.ko has been loaded. 
/dev/nvidia0 and /dev/nvidiactl is also present I am also attaching a 
boot lon. Please let me know if any more information is required.

Thanks
S.
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Mon Jun  6 07:33:01 IST 2005
    bsdboy at firebox.localdomain:/usr/obj/usr/src/sys/FIREBOX
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (994.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536870912 (512 MB)
avail memory = 515612672 (491 MB)
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX 5700LE> mem 0xe0000000-0xefffffff,0xd0000000-0xd0ffffff irq 11 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xd1000000-0xd1000fff irq 5 at device 11.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xd1001000-0xd10010ff irq 11 at device 13.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0b:2b:0d:fa:7c
pcm0: <Creative EMU10K1> port 0x2400-0x241f irq 5 at device 15.0 on pci2
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1000-0x101f irq 5 at device 31.2 on pci0
usb1: <Intel 82801AA (ICH) USB controller> on uhci0
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37b irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ulpt0: Canon BJC-2100SP, rev 1.00/1.02, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ugen0: Logitech product 0x0920, rev 1.10/0.01, addr 2
ugen1: vendor 0x1131 product 0x1001, rev 1.10/3.73, addr 3
Timecounter "TSC" frequency 994456955 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38166MB <ST340014A/3.06> [77545/16/63] at ata0-master UDMA66
ad1: 76319MB <ST380011A/3.06> [155060/16/63] at ata0-slave UDMA66
acd0: CDRW <SAMSUNG CD-R/RW SW-232B/R301> at ata1-master PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SAMSUNG CD-R/RW SW-232B R301> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [259375 x 2048 byte records]
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
Mounting root from ufs:/dev/ad0s2a


More information about the freebsd-questions mailing list