Make kernel fails

Lisa Casey lisa at jellico.com
Wed Sep 14 12:33:05 PDT 2005


Hi,

I'm running FreeBSD 3.2 on this particular box (yes, I know it's old, I know I should be running 4.x or 5.x but  that's beside the point). I'm rebuilding my kernel to include pseudo-device vn support. I modified the GENERIC kernel, config ran OK, make depend ran OK but make stops with this:

make: don't know how to make ../../sys/param.h. Stop

My kernel configuration is below. By the way - any other comments on what I might have wrong here or how I might improve this kernel any are welcome - I haven't rebuilt a kernel in a number of years so I feel a bit "rusty" here.

Thanks,

Lisa Casey


#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# JELLICO kernel built 9/14/05 with vn support (Vnode driver)
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#       $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $

machine         "i386"
# cpu           "I386_CPU"
# cpu           "I486_CPU"
cpu             "I586_CPU"
# cpu           "I686_CPU"
ident           JELLICO
maxusers        48

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         MFS                     #Memory Filesystem
options         MFS_ROOT                #MFS usable as root device, "MFS" req'ed
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, "NFS" req'ed
options         MSDOSFS                 #MSDOS Filesystem
options         "CD9660"                #ISO 9660 Filesystem
options         "CD9660_ROOT"           #CD-ROM usable as root. "CD9660" req'ed
options         PROCFS                  #Process filesystem
options         "COMPAT_43"             #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Be pessimistic about Joe SCSI device
options         UCONSOLE                #Allow users to grab the console
options         FAILSAFE                #Be conservative
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor

config          kernel  root on wd0
# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options        NCPU=2                  # number of CPUs
#options        NBUS=4                  # number of busses
#options        NAPIC=1                 # number of IO APICs
#options        NINTR=24                # number of INTs

controller      isa0
controller      pnp0
controller      eisa0
controller      pci0

controller      fdc0    at isa? port "IO_FD1" bio irq 6 drq 2
disk            fd0     at fdc0 drive 0
disk            fd1     at fdc0 drive 1

options         "CMD640"        # work around CMD640 chip deficiency
controller      wdc0    at isa? port "IO_WD1" bio irq 14
disk            wd0     at wdc0 drive 0
disk            wd1     at wdc0 drive 1
controller      wdc1    at isa? port "IO_WD2" bio irq 15
disk            wd2     at wdc1 drive 0
disk            wd3     at wdc1 drive 1

options         ATAPI           #Enable ATAPI support for IDE bus
options         ATAPI_STATIC    #Don't do it as an LKM
device          acd0            #IDE CD-ROM
device          wfd0            #IDE Floppy (e.g. LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
# controller    ncr0
# controller    ahb0
# controller    ahc0
# controller    isp0

# This controller offers a number of configuration options, too many to
# document here  - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
controller      dpt0

# controller    adv0    at isa? port ? cam irq ?
controller      adw0
# controller    bt0     at isa? port ? cam irq ?
# controller    aha0    at isa? port ? cam irq ?

# controller    scbus0

# device                da0

# device                sa0

# device                pass0

# device                cd0     #Only need one of these, the code dynamically gr
ows

# device                wt0     at isa? port 0x300 bio irq 5 drq 1
# device                mcd0    at isa? port 0x300 bio irq 10

# controller    matcd0  at isa? port 0x230 bio

# device                scd0    at isa? port 0x230 bio

# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller      atkbdc0 at isa? port IO_KBD tty
device          atkbd0  at isa? tty irq 1
device          psm0    at isa? tty irq 12

device          vga0    at isa? port ? conflicts

# splash screen/screen saver
# pseudo-device splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device         vt0     at isa? tty
#options                XSERVER                 # support for X server
#options                FAT_CURSOR              # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options                PCVT_SCANSET=2          # IBM keyboards are non-std

device          npx0    at isa? port IO_NPX irq 13

#
# Laptop support (see LINT for more options)
#
# device                apm0    at isa? disable flags 0x31 # Advanced Power Mana
gement

# PCCARD (PCMCIA) support
#controller     card0
#device         pcic0   at card?
#device         pcic1   at card?

device          sio0    at isa? port "IO_COM1" flags 0x10 tty irq 4
device          sio1    at isa? port "IO_COM2" tty irq 3
device          sio2    at isa? disable port "IO_COM3" tty irq 5
device          sio3    at isa? disable port "IO_COM4" tty irq 9

# Parallel port
device          ppc0    at isa? port? flags 0x40 net irq 7
controller      ppbus0
device          lpt0    at ppbus?
device          plip0   at ppbus?
device          ppi0    at ppbus?
#controller     vpo0    at ppbus?

#
# The following Ethernet NICs are all PCI devices.
#
# device ax0            # ASIX AX88140A
# device de0            # DEC/Intel DC21x4x (``Tulip'')
# device fxp0           # Intel EtherExpress PRO/100B (82557, 82558)
# device mx0            # Macronix 98713/98715/98725 (``PMAC'')
# device pn0            # Lite-On 82c168/82c169 (``PNIC'')
device rl0              # RealTek 8129/8139
# device tl0            # Texas Instruments ThunderLAN
# device tx0            # SMC 9432TX (83c170 ``EPIC'')
# device vr0            # VIA Rhine, Rhine II
device vx0              # 3Com 3c590, 3c595 (``Vortex'')
# device wb0            # Winbond W89C840F
device xl0              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.

device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
# device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
# device ep0 at isa? port 0x300 net irq 10
# device ex0 at isa? port? net irq?
device fe0 at isa? port 0x300 net irq ?
# device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
# device lnc0 at isa? port 0x280 net irq 10 drq 0
# device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
# device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
# device cs0 at isa? port 0x300 net irq ?

pseudo-device   loop
pseudo-device   ether
pseudo-device   sl      1
pseudo-device   ppp     1
pseudo-device   tun     1
pseudo-device   pty     16
pseudo-device   gzip            # Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options         KTRACE          #kernel tracing

# This provides support for System V shared memory and message queues.
#
options         SYSVSHM
options         SYSVMSG
options         SYSVSEM

#  The `bpfilter' pseudo-device enables the Berkeley Packet Filter.  Be
#  aware of the legal and administrative consequences of enabling this
#  option.  The number of devices determines the maximum number of
#  simultaneous BPF clients programs runnable.
#pseudo-device  bpfilter 4      #Berkeley packet filter
pseudo-device   vn      1       #Vnode driver


-------------- next part --------------
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.21/96 - Release Date: 9/10/2005


More information about the freebsd-questions mailing list