usb memory chip works fine
Damon Blom
surferdamon at adelphia.net
Tue Sep 13 21:06:20 PDT 2005
---------- Forwarded Message ----------
Subject: Re: freebsd on memory card
Date: Thursday 08 September 2005 10:14 pm
From: Damon Blom <surferdamon at adelphia.net>
To: Jerahmy Pocott <quakenet1 at optusnet.com.au>, questions at freebsd.org
On Thursday 08 September 2005 06:23 am, you wrote:
> On 08/09/2005, at 6:36 AM, Damon Blom wrote:
> > Hi
> > Still no go.
> > will boot (very slowly) from external usb hard drive.
> > da0 maxtor scsi -0 device 194481 mb
> > will not boot
> > da1 hp digital drive 976 mb (whole disk)
> > da1s1a /
> > da1s1d /usr
> > I disabled hitachi drive and external maxtor drive
> > get
> > F1 Freebsd
> > F5 drive1
> > will not let me press enter
> > Phoenix Bios version F.35
> > Thank's (I can still mount it and r/w from it)
> > Damon
>
> I would say, and this is just a guess, that the bios doesn't recognise
> it as a bootable device or it is unable to find/use the boot block?
Hi Thank's for the reply. In fdisk I just said "A" and then "S" to set
bootable before "W" to write it out. I did change /etc/fstab to da1s1a
and da1s1d. When I do fdisk after mounting it it says
device /mnt/boot/mbr is not character special. Info from dos bootblock;
data for partition 1,2,3,4 is unused.
I'll try putting small dos partition first.
Thank's
Damon
Hi
All work's fine. Used
boot0cfg -v -b /mnt/boot/boot0 da1
Now boots up fine (But loads very slowly).
Damon
H-------------------------------------------------------
More information about the freebsd-questions
mailing list