tape backup coredump

Michael Sherman msherman77 at gmail.com
Tue Sep 6 08:11:45 PDT 2005


Good morning all.

I am having a problem with my tape drive, which gives me a coredump
when I try to "bsdtar" any directory. The gtar doesn't, however it
exits with an error message. I was wondering if anyone had similar
issues.

I am running 5.3 release, with the GENERIC kernel, only it was
recompiled with the following flags:

CPUTYPE?=p3
CFLAGS= -O -pipe

The SCSI card is Tekram, and the tape drive is Sony, the models can be
seen from the dmesg.

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Tue Sep  6 09:14:39 EDT 2005
    mike at mike.com:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <DELL   WS 220 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (993.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268034048 (255 MB)
avail memory = 252620800 (240 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL WS 220 > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82820 host to AGP bridge> mem 0xf0000000-0xf3ffffff at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
trm0: <Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter> port
0xec00-0xecff mem 0xfafff000-0xfaffffff irq 19 at device 10.0 on pci2
trm0: [GIANT-LOCKED]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem
0xfaffec00-0xfaffec7f irq 18 at device 12.0 on pci2
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:b0:d0:a2:4a:60
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xff80-0xff9f irq 19
at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH (82801AA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 17 at
device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1881A AC97 Codec>
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc9800-0xcbfff,0xc0000-0xc97ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 993327947 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 76319MB <ST380020A/3.60> [155061/16/63] at ata0-master UDMA66
ad1: 76319MB <WDC WD800BB-00CCB0/22.04A22> [155061/16/63] at ata0-slave UDMA66
acd0: CDRW <SONY CD-RW CRX140E/1.0n> at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
sa0 at trm0 bus 0 target 6 lun 0
sa0: <SONY SDT-9000 0400> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/ad0s1a
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled
pid 706 (bsdtar), uid 0: exited on signal 11 (core dumped)

Thanks in advance.


More information about the freebsd-questions mailing list