Realtek High Definition Soundcard
Berk Gulenler
gulenler at boun.edu.tr
Thu Oct 6 23:39:22 PDT 2005
Jakob Breivik Grimstveit wrote:
Berk Gulenler wrote on Thu, 06 Oct 2005 17:01:
Is there any way to install Realtek high definition soundcard? I try the
open sound system program(lastest version). But it doesnt work.
What didn't work? It's impossible to help unless you provide more information
than this...
This is log file of open sound system. It may help about the problem.
Starting OSS/FreeBSD 3.99.3c Tue Oct 4 17:06:45 EEST 2005
5:06PM up 13 mins, 1 user, load averages: 0.16, 0.06, 0.05
======= config =====
# Use soundconf to edit this file.
/SECUREAUDIO ON
/IRQEXCLUDE 3 4
/DMAEXCLUDE 2
-PCI26688086 #Intel High Definition Audio (Azalia) *BETA*
HDAUDIO ON
#NEEDS_MMPCI
====== pnpres.dat ========
====================
Config option 'intelpci_rate_tuning=280' defined
Warning: Some of the devices failed to initialize
OSS/FreeBSD 3.99.3c (C) 4Front Technologies 1996-2004
License serial number: E00000008
**** UNREGISTERED VERSION ****
Drivers: ALL
License will expire after: 12/2005
*** Unregistered version ***
Build: 200509191034
Kernel: FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
[1]root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Card config:
(Intel High Definition Audio (Azalia) controller at 0xdfffc000 irq 16)
Audio devices:
Synth devices:
Midi devices:
Mixers:
========== dmesg printout follows ========
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ums0: Microsoft Basic Optical Mouse, rev 1.10/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2799996759 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDRW <TOSHIBA CDW/DVD SD-R1612/TB02> at ata0-master PIO4
ad4: 114498MB <SAMSUNG SP1213C/SV100-34> [232632/16/63] at ata2-master
SATA150
Mounting root from ufs:/dev/ad4s3a
myk0: link up
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #2 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia)
controller failed.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...4 1 3 0 0 done
No buffers busy after final sync
Uptime: 29m28s
myk0: link down
ukphy0: detached
miibus0: detached
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
[2]root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <INTEL D915GUX >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P
GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
>
Hyperthreading: 2 logical CPUs
real memory = 536014848 (511 MB)
avail memory = 514842624 (490 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D915GUX> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.11.1.2>
port 0xa800-0xa8ff mem 0xdfcfc000-0xdfcfffff irq 17 at device 0.0 on
pci4
myk0: Ethernet address: 00:11:11:65:a8:b5
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xcc00-0xcc1f irq 23 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xd000-0xd01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xd400-0xd41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xd800-0xd81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xb800-0xb8ff mem
0xdfeffc00-0xdfeffcff irq 22 at device 1.0 on pci6
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:02:44:92:5e:9d
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH6 SATA150 controller> port
0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07
irq 19 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <floppy drive controller> port
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ums0: Microsoft Basic Optical Mouse, rev 1.10/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2799995891 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDRW <TOSHIBA CDW/DVD SD-R1612/TB02> at ata0-master PIO4
ad4: 114498MB <SAMSUNG SP1213C/SV100-34> [232632/16/63] at ata2-master
SATA150
Mounting root from ufs:/dev/ad4s3a
myk0: link up
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #2 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia)
controller failed.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 0 1 0 0 done
No buffers busy after final sync
Uptime: 2m33s
myk0: link down
ukphy0: detached
miibus0: detached
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
[3]root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <INTEL D915GUX >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2799.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P
GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
>
Hyperthreading: 2 logical CPUs
real memory = 536014848 (511 MB)
avail memory = 514842624 (490 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D915GUX> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. 8.11.1.2>
port 0xa800-0xa8ff mem 0xdfcfc000-0xdfcfffff irq 17 at device 0.0 on
pci4
myk0: Ethernet address: 00:11:11:65:a8:b5
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xcc00-0xcc1f irq 23 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xd000-0xd01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xd400-0xd41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xd800-0xd81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xb800-0xb8ff mem
0xdfeffc00-0xdfeffcff irq 22 at device 1.0 on pci6
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:02:44:92:5e:9d
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH6 SATA150 controller> port
0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07
irq 19 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <floppy drive controller> port
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ums0: Microsoft Basic Optical Mouse, rev 1.10/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2799992755 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDRW <TOSHIBA CDW/DVD SD-R1612/TB02> at ata0-master PIO4
ad4: 114498MB <SAMSUNG SP1213C/SV100-34> [232632/16/63] at ata2-master
SATA150
Mounting root from ufs:/dev/ad4s3a
myk0: link up
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #2 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia)
controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #2 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia)
controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #2 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia)
controller failed.
References
1. mailto:root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
2. mailto:root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
3. mailto:root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
More information about the freebsd-questions
mailing list