5.4 reboots when I plug in a flash drive?

Parv parv at pair.com
Tue Oct 4 17:39:42 PDT 2005


in message <43431D86.40903 at fusemail.com>,
wrote Brian John thusly...
>
> Ok, I tried booting up with the drive installed.  If I leave it
> installed while it is booting up, it eventually reboots.

Sorry about that that did not help.  :(


> However, I was able to unplug it during boot and look at dmesg.
> It says this over and over again:
> 
> umass0: vendor 0x10d6 USB 2.0(FS) FLASH DISK, rev 1.10/1.00, addr 2
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <USB2.0 (FS) FLASH DISK 1.00> Removable Direct Access SCSI-0 device
> da0: 1.000MB/s transfers
> da0: 119MB (245473 512 byte sectors: 64H 32S/T 119C)
> umass0: BBB reset failed, STALLED
> umass0: BBB bulk-in clear stall failed, STALLED
> umass0: BBB bulk-out clear stall failed, STALLED
> (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
...
> umass0: BBB reset failed, STALLED
> umass0: BBB bulk-in clear stall failed, STALLED
> umass0: BBB bulk-out clear stall failed, STALLED
> umass0: at uhub2 port 1 (addr 2) disconnected
> (da0:umass-sim0:0:0:0): lost device
> (da0:umass-sim0:0:0:0): removing device entry
> Opened disk da0 -> 5
> umass0: detached
> 
> I am running FreeBSD 5.4.  Does this shed some light on the problem?

I personally can't say; i requested the above information so that
others may be able to help you.


  - Parv

-- 



More information about the freebsd-questions mailing list