5.4 reboots when I plug in a flash drive?
Brian John
brianjohn at fusemail.com
Tue Oct 4 17:26:04 PDT 2005
Parv wrote:
>in message
><1468.209.87.176.132.1128439684.fusewebmail-19592 at webmail.fusemail.com
>
>
>>, wrote Brian John thusly...
>>
>>I just got a 128MB USB flash drive. When I plug it in in FreeBSD,
>>the box promptly reboots! What would cause this?
>>
>>
>
>I don't know the cause.
>
>Have you tried booting FreeBSD from power-off state w/ the flash
>drive already inserted? That may solve your booting problem, but
>will not make use of the drive any easier.
>
>Which version if FreeBSD are you using? Which of the [ueo]hci
>drivers come up in dmesg(8) on instertion of the USB drive?
>
>
> - Parv
>
>
>
Ok, I tried booting up with the drive installed. If I leave it
installed while it is booting up, it eventually reboots. However, I was
able to unplug it during boot and look at dmesg. It says this over and
over again:
umass0: vendor 0x10d6 USB 2.0(FS) FLASH DISK, rev 1.10/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB2.0 (FS) FLASH DISK 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 119MB (245473 512 byte sectors: 64H 32S/T 119C)
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: at uhub2 port 1 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
Opened disk da0 -> 5
umass0: detached
I am running FreeBSD 5.4. Does this shed some light on the problem?
Thanks
/Brian
More information about the freebsd-questions
mailing list