Kernel build failed in /usr/src/sys/modules/i2c/controllers/viapm

[Ewald Jenisch]

Hi,

While compiling a fresh kernel for a 5.4 system cvsup-ed as per today
the build process ran into a stop with the exact messages
below. Please note that "make buildworld" completed without any errors
only "make buildkernel kernconf=EJ-SMP" died.

Also tried to cleanup everything (i.e. remove /usr/obj/* as per the
Handbook) and starting a fresh "make buildworld" followed by "make
buildkernel" but the errors remained.

Please note that my "custom" kernel is nothing more than a re-name of
the SMP-kernel at the moment:

# pwd
/usr/src/sys/i386/conf
# diff SMP EJ-SMP
9c9
< ident         SMP-GENERIC
---
> ident         EJ-SMP


Finally I tried cvsup-ing the source-tree again (cvsup -g -L 2
./stable-supfile ) and re-running the build process but this too
didn't help anything.

Has anybody else experienced these problems?

Thanks much in advance for any clue,
-ewald

------------------------------ < Cut here > ------------------------------


# make buildkernel KERNCONF=EJ-SMP
===> i2c/controllers/viapm
cc -O -pipe  -DVIAPM_BASE_ADDR=0x6000 -D_KERNEL -DKLD_MODULE -nostdinc -I-   -in
clude /usr/obj/usr/src/sys/EJ-SMP/opt_global.h -I. -I@ -I@/contrib/altq -I@/../i
nclude -finline-limit=8000 -fno-common  -I/usr/obj/usr/src/sys/EJ-SMP -mno-align
-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-ss
e2 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -fformat-extensions -
std=c99 -c /usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:968: error: `
isa_driver' undeclared here (not in a function)
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:968: error: i
nitializer element is not constant
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:968: error: (
near initialization for `isa_viapm_driver_mod.dmd_driver')
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:968: error: `
isa_devclass' undeclared here (not in a function)
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:968: error: i
nitializer element is not constant
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:968: error: (
near initialization for `isa_viapm_driver_mod.dmd_devclass')
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:969: error: i
nitializer element is not constant
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:969: error: (
near initialization for `isa_viapropm_driver_mod.dmd_driver')
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:969: error: i
nitializer element is not constant
/usr/src/sys/modules/i2c/controllers/viapm/../../../../pci/viapm.c:969: error: (
near initialization for `isa_viapropm_driver_mod.dmd_devclass')
*** Error code 1

Stop in /usr/src/sys/modules/i2c/controllers/viapm.
*** Error code 1

Stop in /usr/src/sys/modules/i2c/controllers.
*** Error code 1

Stop in /usr/src/sys/modules/i2c.
*** Error code 1

Stop in /usr/src/sys/modules.
*** Error code 1

Stop in /usr/obj/usr/src/sys/EJ-SMP.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
root at aurora src # 


-- 
........................................................................
Dr. Mag. Ewald Jenisch

OeKB - Oesterreichische Kontrollbank AG
IT Dept.
1011 Vienna, Strauchgasse 1-3, Austria
Phone: +43-1-53127-2175, Fax: +43-1-53127-4175
email: ewald.jenisch at oekb.at | nic-hdl: EJ63 | GnuPG Key-ID: 0x55E72F60
http://www.oekb.co.at  
........................................................................

This message is confidential and intended solely for the addressee. It
is likely to be subject to banking secrecy. If you have received this
e-mail erroneously, please contact the sender and delete it from your
computer, otherwise any use of this information may lead to
detrimental legal consequences. Anyone communicating with us by e-mail
accepts the risks involved with the potential loss of confidentiality.

Diese Nachricht ist vertraulich und nur für den Adressaten
bestimmt. Sie unterliegt wahrscheinlich dem Bankgeheimnis. Wenn Sie
diese E-Mail irrtümlich erhalten haben, kontaktieren Sie bitte den
Absender und löschen Sie die E-Mail von Ihrem Computer, andernfalls
kann jede Verwendung dieser Informationen nachteilige Rechtsfolgen
auslösen. Jeder, der mit uns über E-Mail kommuniziert, akzeptiert die
mit dem möglichen Verlust von Vertraulichkeit verbundenen Risken.