external usb2 drive enclosure on 5.3

dave dmehler26 at woh.rr.com
Tue May 3 19:20:51 PDT 2005


Hello,
I've got a 5.3 box that i'd like to plug a usb2 drive enclosure in to. I'm
concerned about 5.3's detection of my usb ports, they're all usb2 ports, yet
some of them are showing up as only usb1. Here's my usb information:

uhci0: <VIA 83C572 USB controller> port 0xde00-0xde1f irq 11 at device 16.0
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdf00-0xdf1f irq 11 at device 16.1
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.2
on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe100-0xe11f irq 11 at device 16.3
on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8115000-0xe81150ff irq 10 at
device 16.4 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered

The enclosure itself is for a 20 gb 2.5 inch laptop hard drive, and it has
two cables coming out of it, one for power the other data. I'm wondering if
it matters which controller one should plug them into or if that doesn't
matter at all? The enclosure was purchased from CompUSA and all i can say is
that at least this one shows up, the sandisk one, was a no show.
When i plug in the enclosure here's the output i get:

(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): MEDIUM ERROR info?:202020 asc:11,20
(da0:umass-sim0:0:0:0): Reserved ASC/ASCQ pair
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): MEDIUM ERROR info?:202020 asc:11,20
(da0:umass-sim0:0:0:0): Reserved ASC/ASCQ pair
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): MEDIUM ERROR info?:202020 asc:11,20

That repeats. Any help appreciated.
Thanks.
Dave.



More information about the freebsd-questions mailing list