Problems with user ppp

Vittorio v.demartino2 at virgilio.it
Tue May 3 13:36:05 PDT 2005


On my PC with the latest freebsd 5.4 I'm trying to connect to my ISP "alice" 
by means of user ppp. Here is my /etc/ppp/ppp.conf: 
#
default:
 set log Phase Chat LCP IPCP CCP tun command
 ident user-ppp VERSION (built COMPILATIONDATE)
 set device /dev/cuaa0
 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
           \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
 set timeout 180                        # 3 minute idle timer (the default)

alice:
 #
 # edit the next three lines and replace the items in caps with
 # the values which have been assigned by your ISP.
 #

 set phone "7020803380"
 set authname "pippolino at tin.it"
 set authkey "nonteladico"

 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR                    # Add a (sticky) default route
 enable dns                             # request DNS info (for resolv.conf)

AND
in /etc/ppp/options

lock
noauth

Launching "ppp -background alice" I can connect with my ISP but ..... names 
are not resolved because PPP doesn't get the DNSs provided by the peer and 
uses the first DNS server in in /etc/resolv.conf ,10.255.201.22, of a 
previous  dhcp connection at office.
Here it is an extract of the connection log:
.................................................................................
ppp[505]: tun0: Phase: deflink: his = CHAP 0x05, mine = none
ppp[505]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from apx-rm5)
ppp[505]: tun0: Phase: Chap Output: RESPONSE (pippolino at tin.it)
ppp[505]: tun0: Phase: Chap Input: SUCCESS
ppp[505]: tun0: IPCP: Using trigger address 0.0.0.0
ppp[505]: tun0: CCP: FSM: Using "deflink" as a transport
ppp[505]: tun0: CCP: deflink: State change Initial --> Closed
ppp[505]: tun0: CCP: deflink: LayerStart.
ppp[505]: tun0: CCP: MPPE: Not usable without CHAP81
ppp[505]: tun0: CCP: deflink: SendConfigReq(1) state = Closed
ppp[505]: tun0: CCP:  DEFLATE[4] win 15
ppp[505]: tun0: CCP:  PRED1[2]
ppp[505]: tun0: CCP: deflink: State change Closed --> Req-Sent
ppp[505]: tun0: Phase: deflink: lcp -> open
ppp[505]: tun0: Phase: bundle: Network
ppp[505]: tun0: IPCP: FSM: Using "deflink" as a transport
ppp[505]: tun0: IPCP: deflink: State change Initial --> Closed
ppp[505]: tun0: IPCP: deflink: LayerStart.
ppp[505]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed
ppp[505]: tun0: IPCP:  IPADDR[6] 0.0.0.0
ppp[505]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
ppp[505]: tun0: IPCP:  PRIDNS[6] 10.155.201.22
                                                   ^^^^^^^^^^^^^
ppp[505]: tun0: IPCP:  SECDNS[6] 255.255.255.255
ppp[505]: tun0: IPCP: deflink: State change Closed --> Req-Sent
ppp[505]: tun0: IPCP: deflink: RecvConfigReq(1) state = Req-Sent
ppp[505]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
ppp[505]: tun0: IPCP:  IPADDR[6] 80.21.255.5
ppp[505]: tun0: IPCP: deflink: SendConfigAck(1) state = Req-Sent
ppp[505]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
ppp[505]: tun0: IPCP:  IPADDR[6] 80.21.255.5
ppp[505]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent
ppp[505]: tun0: LCP: deflink: RecvProtocolRej(3) state = Opened
ppp[505]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control 
Protocol)
ppp[505]: tun0: CCP: deflink: State change Req-Sent --> Stopped
ppp[505]: tun0: IPCP: deflink: RecvConfigNak(1) state = Ack-Sent
ppp[505]: tun0: IPCP:  IPADDR[6] 212.216.149.154
ppp[505]: tun0: IPCP:  IPADDR[6] changing address: 0.0.0.0  --> 
212.216.149.154
ppp[505]: tun0: IPCP:  PRIDNS[6] 10.155.201.22
                                                   ^^^^^^^^^^^^^^
ppp[505]: tun0: IPCP:  SECDNS[6] 255.255.255.255
ppp[505]: tun0: IPCP: Primary nameserver set to 10.155.201.22
ppp[505]: tun0: IPCP: deflink: SendConfigReq(2) state = Ack-Sent
ppp[505]: tun0: IPCP:  IPADDR[6] 212.216.149.154
ppp[505]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
ppp[505]: tun0: IPCP:  PRIDNS[6] 10.155.201.22
ppp[505]: tun0: IPCP:  SECDNS[6] 255.255.255.255
ppp[505]: tun0: IPCP: deflink: RecvConfigAck(2) state = Ack-Sent
...................................................................................

What should I do?
Vittorio


More information about the freebsd-questions mailing list