2 Nic on same subnet.
sarath at linuxtechs.net
Tue Jun 21 19:46:32 GMT 2005
Stephan Weaver wrote:
> Can you give me an example of how this is done? <--- please do not TOP
>> From: Sarath ER <sarath at linuxtechs.net>
>> To: freebsd-questions at freebsd.org
>> Subject: Re: 2 Nic on same subnet.
>> Date: Tue, 21 Jun 2005 12:10:33 -0700
>> Stephan Weaver wrote:
>>> Hello All,
>>> I am trying to place my network behind a firewall [FreeBSD BASED].
>>> What i have Done!
>>> I have 2 Nic in the BSD PC.
>>> vr0, vr1.
>>> Both on the same subnet eg.
>>> vr0 - 192.168.0.1 , vr1 - 192.168.0.2.
>>> I Plug the Ethernet Cable From the DSL modem Into my vr0 interface.
>>> I Plug the Ethernet Cable from the SWITCH into my vr1 interface.
>>> I am running ipnat as follows.
>>> map vr0 192.168.0.0/24 -> 0.0.0.0/32 proxy port ftp ftp/tcp
>>> map vr0 192.168.0.0/24 -> 0.0.0.0/32 portmap tcp/udp 40000:60000
>>> map vr0 192.168.0.0/24 -> 0.0.0.0/32
>>> Here are some messages i get from my /var/log/messages.
>>> Jun 20 22:47:36 pizzaboys kernel: arp: 192.168.0.198 is on vr0 but
>>> got reply from 00:08:74:4f:57:c5 on vr1
>>> Thank You, Stephan Weaver
>>> stephanweaver at hotmail.com
>> You must delete the routes for the network from both interfaces and
>> add individual host routes to the interfaces. Suppose you have a
>> cable modem on vr0 add a host route for that Ip and assign it to vr0
>> interface and add the rest of the hosts in your lan in vr1 interface.
>> Or you can choose a different network or subnet the same ip block
>> - Sarath
route delete -net yournetworkhere/maskhere <- you might have to do it
route add -host ipaddressofthelocalinterface -interface vr0
route add -host ipaddressofcablemodemhere -interface vr0
route add -host ipaddressofvr1here -interface vr1
route add -host firsthostinlan -interface vr1
route add -host secondhostinlan -interface vr1
I think this would do it...
More information about the freebsd-questions